mould hot runner 1.no dead angle 2.good color change ability 3.Hotset heating elements 4.one year quality guarantee

Anole hot runner

Advantage of mould HOT RUNNER 

1,Because product must be produced using 100% of new resin without any loss at all the time,defect or trouble due to foreign material can be prevented.

2,Filling up cavity is needed only, because resin is always being melted up to gate, thus the time of injection, measurement, cooling and frame opening/closing is shortened as well as the time to take out sprue and runner.

3,Improvement of product quality-mould hot runner

Because the inhection pressure ofinhection molder is directly transferred to cavity, the problem of product shrinkage, weld, and deformation due to internal stress can be solved.

4,Increase of mechanical efficiency

Efficiency of molder is enhanced because injection quantity, pressure, mold opening distance may be decreased as much as the amount of sprue and runner.-mould hot runner

5,Extension of mold life

  The pressure exerted on the mold is decreased due to decrease of injection pressure and 3-stage mold of large type may be converted into 2-stage mold in case of using mould hot runner, so that the trouble which can occur in 3-stage mold may be prevented.

all kinds mould hot runner nozzle