1).High Automatization 2).High Intelligence:The machine can be controlled through touch screen and running status is shown on i

1).High Automatization2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.4).No Contamination:Closed production zone, good self-lubrication system avoid contamination.5).Low Cost:Low consumption of electricity, air and water.6).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.

  

1.Specs

Type	Item	Unit	Technology Data
SJ-90B	Material	/	PP,PE etc
	Max. Product Volume	L	50
	Productive Capacity	pcs/hr	60-80
	Die Number	set	1
	Clamping force	KN	360
	platen opening stroke	mm	400-1000
	platen size	mm	880*780
	Max mould size	mm	700*960
	Mould thickness	mm	450-500
	Accumulator capacity	L	6.6
	Heating Zone Number	Part	7
	Die diameter	mm	350
	Injection pressure	Mpa	8
	Screw diameter	mm	90
	Screw L/D ratio	L/D	20:1
	Plasticising Capacity	Kg/hr	110
	Screw rotation rate	r/min	10-86
	Voltage/ Frequency	V/ HZ	220-380/50-60
	Driving Power	KW	75
	Heating Power	KW	45
	Average Power	KW	38
	Compressed Air Required	Mpa	0.7
	Dimension	m	4.4*1.8*2.7
	Weight	Ton	12.5
Note: Due to continual improvement, specifications are subject to change without notification. Please refer to the latest actual machine.

2.Configuration

Item name	Brand
Oil pump	Duplex vane pump KEET(Sino-Japan joint)
Hydraulic valve	KEET(Sino-Japan joint)
Proportional valve	KEET(Sino-Japan joint)
PLC	Mitsubishi(Japan)
Touch screen	Xinje(China)
Inverter	EURA (China)
Time relay	CHNT(China)

3. Spare parts(for free)

Item Name	Quantity
Heating coil	6pcs
Small sized Control switch	2pcs
Hydraulic cylinder seals	2pcs
proximityswitch	2pcs
Control switch	2pcs
hydraulic pipe	1pcs
Temperature controller	1pcs
Electric heating	2pcs
Relay	2pcs
Tools	1set

 

  C.Machine Features:C.1. Stable performance with advanced PLC.C.2. Conveying preforms automatically with conveyor.C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.C.8. Strong clamping force with high pressure and double crank links to lock the mold.C.9. Two ways of operating: automatic and manual.C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.C.12. Contamination is avoided for the bottle body.C.13. Ideal effect of the chilling with the chilling system.C.14. Easy installation and startingC.15. Low rejection rate: less than 0.2 percent.

Pet bottle Machine SJ-90B