Dry calibrators with 250mm -200mm length depending on complexity of profile and speed.Distance between each calibrator is 1mm.

(1)Efficient water suction unit between last calibrator and tank -> no water transfer from tank to calibrator   

     possible–less wear.

(2)Dry calibrators with 250mm -200mm length depending on complexity of profile and speed.  Distance between 

     each calibrator is 1mm.   

(3)Main surface inlet water cooling for high surface gloss and quality->water flow can be controlled by

     adjustment valve.  

(4)3 mounting pins for each calibrator part for precise assembly.

(5) Individual vacuum adjustment on each dry calibrator->energy saving.

(6) Transparent color tubes, for easy observation of water flow.

(7) O-Ring free calibrator->each calibrator water hole has its own water in/out, so it is easy to check if water  

      hole is plugged.

(8) Detailed cooling sections in calibrators are enlarged, so plugging by dirty water is not so easy possible.

(9) Calibrator 2-3 and 4-5 are connected together with special cooling bridges for water saving.

(10) Aluminum free tooling.

pvc extrusion mould Calibrator