Welcome to ECVERY
Offset Dies
Offset Dies
Supplier Info
[China Supplier]
Contact Person : Ms. Wang Mary
Tel : 86-555-6763794
Fax : 86-555-6763744
Product Detail
1.made with 42CrMo,etc. 2.hardness:HRC52+/-2 3.heat treatment on the surface 4.avaliable in all sizes

We are in this line for more than 10 yearsWe supply press brake tooling and shear blades(knives) for sheet metal Fabrication Manfacturers.Material :42CrMo=42CrMo4=SCM440=4140 Holistic heat treatment :quenching + tempering  +   860 °C Oil                                            quenching  + 390°C  Tempering . General Hardness: 47+/-2 HRC

offset dies form two 90 degree bends in one stroke.Dimensions show amount of offset from inside to outside of metal thickness.Sizes shown are suitable for mild steel to 18 gauge.Often metals and heavier gauges of mild steel can be formed depending on side of offset and press brake capacity available.

  

Offset Dies

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.