Ads by Google
PLASTIC INJECTION Mould standard | HASCO,DME,MEUSBURGER,JIS,CHINA LKM Standard |
Mould base | LKM&Hasco&DME standard (A,B plate 1730,2311,2312,P20 ) |
Material main core and cavity insert | DIN2312,2738,2344,718,S136,8407,NAK80,SKD61,H13 |
Hardness of steel | 46~56HRC |
Material for Slider ,Lifter and all sub insert use | 1.2767 HRC |
Cavity | Single-cavity ,Multi-cavity |
A surface request: | EDM & High Polish |
Gate | Cold runner,Yudo/DME/HASCO/Synventive Hot runner |
Mould life time | 500,000~1,000,000 shots |
Quality | ISO9001-2008 certification |
Product material | PA6/66+GF,ABS,POM,PC,PP,PET,TPE,PVC,HDPE etc |
Lead time | 5~7 Weeks |
Package | Wooden/Plywood case for tool ,PE bags add export carton for parts |
Payment terms | T/T |
Trade terms | FOB NINGBO or CIF |
Export country | Europe countries,USA,Brazil ,Australia ,Middle-east ,Asia etc |
What is Injection Mould?
Injection mould is an economical and very efficient method of producing injection molded parts. It can produce millions of parts with exactly the same shape, dimension, and quality. Some examples of injection molded parts are the mobile phones, mouse, keyboard, and many components found inside the automobile.
How does injection molud works?
Just heat the resin until it melts then force it into the cool mold. Allow it to solidify. Open the mold then take off the molded part.
As the molten resin is being injected into the mold, it enters the mold opening called the sprue. From the sprue this molten material will then be distributed to the runners then it will be fored into the gate and then into the cavity. The cavity must be filled precisely to avoid short shots but it must not be over packed (over packing is forcing more than enough pressure to the resin and it can damage the mold). The molten resin will stay in the cavity for 30 seconds to 1 minute or more until it cools down and solidify. When the resin solidify a molded part is formed. The mold will open and then the molded part will be ejected. The mold closes and its ready for another shot.
Plastic injection mould