Audio mode: compatible with MP3, WMA, WAV formats Frequency range of receiver : 76-108MHz Charging time: 2.5 hours.

Plug-TF card reader wireless Headphone support 2GB

Product Instruction:

Power indicatorPower ON/OFFCharging indicatorUSB portVolume knobPH JackMP3/FM Mode indicatorMP3/FM Mode buttonPre buttonPlay/Pause buttonNext buttonTF Card.

Technical specification

Audio mode: compatible with MP3, WMA, WAV formats

Frequency range of receiver : 76-108MHz

S/N ratio: >90dB

THD: <1%

Frequency response: 20Hz-20KHz

Power supply: 320mA/h chargeable battery

Continuous working time: more than 8 hours based on the volume at 1/3 level

Charging time: 2.5 hours

Working temperature: 0-50 centigrade

Brief introduction

XN-MP03 is a digital Hi-Fi stereo music headphone, compatible with MP3, WMA, WVA. It is available for TF card.

You can listen to school broadcast or other FM ones when you are tired of music. Besides, you can download materials for studying. Indeed, it is perfect. In addition, it is convenient to carry because of its portable design. We can enjoy beautiful music anywhere. Meanwhile, The color of panel is changeable according to your fancy. It is quite fashionable and attractive.

Key points

Battery: 320mA/h, lasting working time 6-8 hours(FM or MP3)FM/MPS mode selectable(you can choose MP3 or FM mode at the same time)Play/Pause, Prev. /Rewind, Next/F.FWD can be controlled at MP3 mode.Press and hold the MP3/FM button for 3 seconds to enter the FM mode and search channel automaticallyON/OFF switch on the leftCompatible with MP3Directly download music by USB cable, USB cable can be used as host function simultaneouslyApplicable TFT cardOutput voltage 550mV (32Ohm resistance)320Ohm Speaker Load (output power ratings is more than 10mW)FM mode is supportable when taking out card or without it. MP3 mode appears when turning on headphone with card.

LED indication

1. Charge indication:

Red LED is on when charging and off when charging is finished.

2. FM/MP3 mode indication:

Green and red LED, green for FM condition, red for MP3.

In order to reduce power consumption, improve working time and make customers clear about conditions at different operation. Flashing red light is on when playing music and static with button of play/pause. Flashing green one can be seen when listening to FM broadcast and static one appears at self-search or half self-search.

Low power indication:Low power indication starts less than 3.3V. Red LED is used as a hint. Flashing LED appears at low power mode. On for 1 second and off for 1 second at the same time, the alarm sound from loudspeaker can be heard for twice. Interval time is 0.5 seconds. Then it turns off for four cycles.

Specific instructions

Press Prev or Next button for 3 seconds for half auto-search. Hand search is with Play/Pause for quite a short time. For an example, it is 88.4MHz and changes to 88.5MHz for pressing the button Again 88.6MHz appears. It comes into half auto-search after three seconds when pressing Prev button for a long time. It searches next until finding the signal perhaps 90.2MHz or others. It is the same to auto-search. Simply half auto-search stops there once finding., but auto-search continues until 20 programs after putting in to the lists. Then skip to broadcast lists and select with the button of Play/Pause. But the situation is applicable when the headphone is on. If you turn it off, you need to search again.

Plug-TF card reader wireless Headphone support 2GB