Welcome to ECVERY
Multimeter re-calibrated SMD components identifier in a set of tweezers Pen R/C meter(PR503)
Multimeter re-calibrated SMD components identifier in a set of tweezers Pen R/C meter(PR503)
Supplier Info
[China Supplier]
Contact Person : Mr. Yao Fred
Tel : 86-25-84676489
Fax : 86-25-84200870
Product Detail
1.Re-Calibrated SMD Components Idebtifier in a set of tweezers 2.Auto power off 3.Diode test 4.Low battery indication

 Digital Pen R/C Multimeter for SMD

 

  

 

 

KEY STRENGTHS:

 PR503, an Environmental Instruments Series, is a pen R/C meter for SMD designed to precisely & quickly measure small chip components. This multimeter have the advance feature of having low battery indication, relative measurement mode, measure diode & polar capacitance, auto power off, and large LCD display with 3999max reading. Surface mount devices are usually tiny and without wire leads, making it much more difficult to test and identify SMD than conventional components. The PR503 gives users an easy way to sort and evaluate loose components and to perform on-board measurements and debugging. Precise tips made of non-magnetic steel are able to pick and reliably contact even smallest SMD components, or take measurements from the devices already mounted on a board. The probe can also be used to test conventional components with wire leads too short to insert into the test terminals.

CE Mark & other standards: PR503 multifunction meter asserts that the item meets all the essential health and safety requirements set out in European Directives. This instrument also complies with IEC1010.

Features:Effective, Reliable and Easy to Use.

With CE Mark, conforms with European health & safety requirements and complies with IEC1010 set standardsWith Pollution Degree 2 & Altitude <2000mWith large LCd display w/ maximum reading 3999Relative MeasurementLow battery indicationWith Auto Power OffMeasure Diode & Polar Capacitance100% Brand NewEnvironment conditionsPollution degree: 2Altitude < 2000 mOperating temperature: 0~40°C, (<80% RH, non-condensing)Storage temperature: -10~60°C, (<70% RH, battery removed)Temperature Coefficient: 0.1 x (specified accuracy) /°C (<18°C or >28°C)MAX. Voltage between terminals and earth ground: 50V DC or 36V AC rmsSample Rate: 3 times/sec for digital dataDisplay: 3 3/4 digits LCD display with max. reading 3999Over Range indication: LCD will display "OL"Low battery indicationAuto power off if idle for 15minPower Supply: 3.0V batteryDimensions: 181 x 35 x 20mm (L x W x H)Weight: 65g. Approx. (battery included)

Specification:Resistance:4000Ω/4KΩ/40KΩ/400KΩ/4MΩ±(1.2%+2),40MΩ±(2.0%+5)Capacitance:4nF±(5.0%+5),40nF/400nF/4uF/40Uf/100uF±(3.0%+3)Diode TestAuto power offLow battery indication 

Accessories included:

Operations Manual

Package:

 Pictures:

Multimeter re-calibrated SMD components identifier in a set of tweezers Pen R/C meter(PR503)

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.