Professional nail drill is an idea filing tool set for nail decoration .It has forward and reverse dual direction-rotations for the left or right-handed nail technicians , from 0 to 14000 rpm adjustable speed ,quiet & smooth operation handpiece with a flexible extension , which is convenient to use for finishing the nail .
Technical specifications:
Voltage : 220V-240V 110V-120V .
Power : 10W.
Collect: 2.5mm(3/32")
Rated Speed : 14000 rpm max .
One set including : Power box , Quick-change Handpiece , bits and Shaft .
A: Installation and wire connection
1. Connect the 3.5 plug of the portable grinding head/hand piece to the OUTPUT socket at the main panel .
2. Connect the output plug of the DC12V voltage-stabilizer to the 6.5 plug on the rear board of the main panel .
3. Select grinding mould of different sizes according to actual requirements,and fasten it into the front of the portable grinding head .
4. Turn the SPEED CONTROL counter clockwise to the end .
5. Switch the power source to OFF .
6. Connect the switching mode voltage stabilizer with the main source power .
B. Operation
1. Switch the source power to ON , and the indicator POWER should be on ,and the Glazing machine is ready for operation .
2. Turn the SPEED CONTROL clockwise slowly and the portable grinding head starts to turn and accelerate to the top speed .
3. Turn the SPEED CONTROL counterlockwise to the decelerate the grinding head .
4.The turning directions can be Swapped : FWD means clockwise direction and REV means counterclockwise direction .
5. Adjust the speed of the grinding head within a reasonable range .
C. Instruction :
1. Don't change the turning direction too frequently ,otherwise it will change the grinding head .
2. Turn the SPPED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning offand switch the main power source to OFF .
3. After operation, put the grinding head on the top of the main panel .
4. While the grinding head is in operation ,never pull out the 3.5 plug of the portable grinding head .
5.For long idle time please disconnect the source power .
6. Any unauthorized disassembling of the product is prohibited , In case of any breakdown , please contact the agent or authorized repair center .We promise swift ,high quality and satisfactory service .
Professional nail drill for nail polish