Ads by Google
| General and Technical Features | ||||
| Manufacturer Product Name | EDNSE PRO/1000 PT Dual Port Server Adapter | |||
| Product Code | 10002PT | |||
| Form Factor | Internal-connected with servers ,Workstations and Others | |||
| Controller-Processor | Intel 82571EB *1 | |||
| Bus Type | PCI Express 1.0a | |||
| Bus Width | x4 lane PCI Express operable in x4, x8, x16 slots | |||
| Bus Speed (x4, encoded rate) | 10 Gbps uni-directional; 20 Gbps bi-directional | |||
| Network Interface Type | Dual-Port ,RJ-45 Slots *2 | |||
| Data Rate(s) Supported | 10, 100, and 1000 Mbps per port | |||
| Connection Parts | RJ-45*2,(10BASE-T,100BASE-T,1000BASE-T). UTP-5 cables. | |||
| IEEE Network Standards | IEEE 802.3(10BASE-T, 100BASE-T,1000BASE-T). | |||
| Typical Power Consumption | 4.95 W (3.3 V & 1.5 A) | |||
| Hardware Certifications | FCC B, UL, CE, VCI, BSMI, CTICK, MIC | |||
| LEDs | 4 (2/port,) solid and blinking | |||
| Brackets *2 | Includes a full-height bracket and a low profile bracket. | |||
| Environment Standard | Physical Dimensions | |||
| Operating Temperature | 0°C~55°C | Length | 13.2cm (5.20 in) | |
| Operating Humidity | 85% | Width | 6.8cm (2.68 in) | |
| Stoke Temperature | -20°C~65°C | Height of Brackets | 12.0cm/8cm (4.72 in/3.15in) | |
| Stoke Humidity | 85% | Packing StandardSize (Unit) | 20cm*15cm*4.5cm(7.87in*5.91in*1.77in) | |
| NOS Software Support | Network Management | |||
| Microsoft Windows* Server 2003, Enterprise,Datacenter (32- and 64-bit) | Wired for Management (WfM) baseline v2.0 enabled forservers | |||
| Microsoft Windows 2000 | DMI 2.0 support,Windows Management Instrumentation (WMI) SNMPmanageable SM Bus support | |||
| Red Hat Linux* 2.4x or later (32- and 64-bit) | Remote Installation Services (RIS) | |||
| FreeBSD 4.x or later | Diagnostics (loopback, testability, PHY register access) | |||
| Novell Netware* 5.x, 6.x | Advanced configuration and power interface (ACPI) 1.0power management | |||
| Sun Solaris* x86, OS 8 and later | Wake on LAN* support over PCI Express* | |||
| SCO Open Server 5, Open Unix 8* | PXE 2.0 enabled through boot read-only memory (ROM) | |||
| Features | Benefits |
| Two Gigabit Ethernet Ports | Applicate two Gigabit copper connections in a single PCI Express * slot, |
| Apply Intel 82571EB GigabitController | Enables two Gigabit connections in a single adapter, delivering increased bandwidthfor slot-constrained servers and providing high performance, reliability, and lowpower use in a single, integrated, dual port PCI Express Gigabit Ethernet controllerchip |
| Load balancing on multipleCPUs | Increases performance on multi-processor systems by efficiently balancing networkloads across CPU cores when used with Receive-Side Scaling from Microsoft orScalable I/O on Linux* |
| Interrupt moderation | Delivers increased performance while significantly reducing CPU utilization |
| Compatible with x4, x8, andx16 full-height 2 PCIExpress* slots | Allows dual-port operation in almost any PCI Express server slot, except x1 slots,and allows each port to operate without interfering with the other |
| Support for most networkoperating systems (NOS) | Enables widespread deployment |
| Remote managementsupport | Reduces support costs with remote management based on industry-wide standards |
| PROSet Utility for Microsoft*Device Manager | Provides point-and-click power over individual adapters, advanced adapter features,connection teaming, and virtual local area network (VLAN) configuration |
| Categoty-5 UTP connection | Using existing 4 pair cabling and saves re-wiring costs. |
| RoHS compliant3,Lead-free1 technology | Compliant with the new European Union directive (effective July 2006) to reduce theuse of hazardous materials |
| Product backing | Backed by EDNSE limited lifetime warranty, 3-months replacement guarantee, and3-years global services warranty , and worldwide support. |
EDNSE network adapter card PRO Gigabit PT Dual Port