IDE RAID PCI Controller Card ~ Create multiple USB connections !
This card is stand-alone Ultra 100/133 PCI to IDE/ATA host controller is the perfect single chip solution for designs based on chip sets without an integrated IDE host controller or designs which need to expand the number of IDE channels to accommodate the growing number of storage peripherals with IDE interface. This card is a PCI 2-channel Ultra ATA/133 IDE host controller based on SILICON IMAGE, with optional RAID 0, 1/0+1 function. Any system with a PCI bus interface can simply add the Ultra 100/133 IDE/ATA interface by adding a card with the PCI card and loading the driver into the system.
Product Feature :Compliant with UDMA5 ATA/100 and UDM6 ATA/13 specificationData transfer rate up to 100MB/sec or 133MB/secCompliant with PCI specification Revision 2.1&2.2Compliant with PCI IDE Controller specification Revision 1.0Compliant with programing Interface for Bus Master IDE ControllerTwo independent Ultra ATA channels with 128/256 bytes buffer per channelConnect up to four IDE/ATA devices (coexist with on-board IDE ports)Fully backwards compatible with Ultra ATA/100, Ultra ATA/66. Ultra ATA/33, IDE/Fast ATA-2 , IDE and ATAPI devicesAutomatic tuning for devices attachedSupport Ultra and Multi-Word DMA timing modesEnhanced data integrity of transferred data with CRCBuilt-in 80 Pin cable detect circuitry
Product Specifications :Silicon Image chip set2 independent IDE/ATA channelsSupports up to 4 IDE/ATA devicesSupports ultra and multi word DAM timing modesCRC (Cyclical Redundancy Check)128 bytes bufferBuilt in 80-pins cable detect circuitrySupports External BIOSSupports bus master DMA at 133 MB/sec PCI burst rateSupports maximum IDE/ATA data transfer rate of 66MB/sec (100MB/sec)3.3V Operating Voltage with 5V tolerant I/O
IDE RAID PCI Controller Card