Welcome to ECVERY
Enterprise Networking Device - Smart Switches - 28 Port L3 Switch
Enterprise Networking Device - Smart Switches - 28 Port L3 Switch
Supplier Info
[China Supplier]
Contact Person : Mr. ZHANG James
Tel : 86-21-67766500
Fax : 86-21-67766518
Product Detail
1. 9k Jumbo Frame 2. L3 Interface Max 256 3. Port binding(Ipv4 /Ipv6) and IP source guard 4. STP,RSTP,MSTP 4. 802.1Q, 802.1P

S7128F

24 GE + 4 10GE Layer 3 Managed Switch

 

 

Overview

 

The UTT S7128F Managed Switch is a 10G IPv6 Ethernet Layer 3 lite switch. It supports IPv6 with hardware and pass the IPv6 form certification Phase II, and comply with the RoHS standard. With the high performance hardware support and rich software features, the switch will match most application for customers.

 

The UTT S7128F is ideal in the distribution or aggregation layer of large networks to provide long distance fiber connections to aggregate access layer switches that are dispersed in different locations. It is also an excellent choice as a core switch for enterprise customers. S7128F offers 24 GE ports and max 4 10GE ports can deployed at Data Center and as a convergence switch for access switches or DSLAM. With RPS. 

Dimension (D*P*H)

415mm×44mm×325mm

Expanded module

2-port 10GE XFP+ sub-card

Expanded slot quantity

2

Management port

1 x RS232 console

Power

AC 110V - 240V 50-60Hz

Maximum power consumption

130W for device

Operating temperature

0 ~ 45° C

Relative humidity

10 ~ 90%(non-condensing)

Forwarding

Storage and forwarding

Switching capacity

128Gbps

Throughput

96Mbps

Port feature

Supports IEEE802.3(10Base-T)

Supports IEEE802.3u(100Base-TX)

Supports IEEE802.3z(1000BASE-X)

Supports IEEE802.3ab(1000Base-T)

Supports IEEE802.3ae(10GBase)

Supports Loopback interface

Supports 9k Jumbo Frame

Supports Port loopback detect

Supports LLDP and LLDP-MED

Supports UDLD

Supports L3 Interface Max 256

Support smart link (or named flexible link)

Port binding(Ipv4 /Ipv6) and IP source guard

MAC

Supports 16K MAC addresses

Supports manual setting of time out

MAC binding(Ipv4 /Ipv6), MAC filter, MAC limit

Port aggregation

Support LACP 802.3ad, max 128 group trunk with max 8 ports for each trunk

Support load balance

STP

IEEEE802.1d(STP)

IEEEE802.1W(RSTP)

IEEEE802.1S(MSTP) Max 48 instance

Root Guard

Bpdu Guard

BPDU forwarding

VLAN feature

Support port-based 802.1Q, 4096 VLAN

Support QinQ and selective QinQ

IP application

IP Protocol(IP support both of IPv4 and IPv6) 

Default Routing, Static Routing, Black hole route, VLSM and CIDR,

VRRP, VRRP v3

Support BFD

ARP guard

Local ARP proxy, Proxy ARP, ARP binding, Gratuitous ARP, ARP limit

Support DCHP Client, Relay, Snooping, Option 82

DHCP Server for IPv4 and IPv6

DHCP v6 and DHCP snooping V6

DNS Client

DNS proxy

IPv4 routing

Supports RIPv1/2,

Reliability and Redundancy Balance

Support MSTP(802.1s)

Support VRRP, LACP load balance

Redundant power supply, power load balancing

Support Firmware & Configure dual fault tolerance backup

Mirroring

Support one to one or any to one mirror

QoS

Support 8 hardware queues per port

Support traffic classification based on IEEE 802.1p, ToS, port and DiffServ

Support SP, WRR.SWRR

Support Traffic Shaping Support PRI Mark/Remark

ACL

Supports ACL ACL TABLE 1K

Support standard and expanded ACL

Support IP ACL and MAC ACL

Support ACL based on source/definition IP, MAC, L3 IP, TCP/UDP port number, IP PRI(DSCP,ToS, Precedence), Time

Support time-based security auto-negotiation

ACL rules can be configured to port, VLAN, VLAN routing interfaces

Can be used for QoS classification

Security

MAC based authentication

S-ARP: ARP inspection, defense ARP-DOS attack and address clone

Anti-Sweep: prevent pingSweep

S-ICMP: resist PING-DOS attack, ICMP unreachable attack

S-Buffer: prevent DDOS attack

Switch engine CPU protection

Key message priority: secure processing of key legal messages

Port credit: inspect illegal DHCP Server, Radius Server.Connection via credit port only

Advanced LPM: filter “Bluster”, “zero day” and ”SQL slammer warm”

Support URPF, avoid IP address clone

All the above technologies efficiently prevent various DOS attack (e.g. ARP, Synflood, Smurf,ICMP attack), support ARP monitoring, defense Worm, Bluster, check sweep and raise alarm

Support 802.1X

Port, MAC, username based

Support account based on time length and traffic

Support guest vlan and auto vlan

Work with private client can manage P2P traffic

MAC Based AAA(Client free access)

PPPOE/PPPOE+ forwarding

Support RADIUS for IPv4 and IPv6

TACACS+ AAA

Management and maintenance

Support CLI, Console(RS-232), Telnet (Ipv4/Ipv6), SSH(Ipv4/Ipv6),SSL connection

Support WEB based NMS

Support SNMPv1/v2c/v3 for IPv4, SNMPv1/v2c for IPv6

Support MIB Support RMON 1, 2, 3, 9

Sflow for IPv4 and IPv6

Support, RAM, Telnet, SSH Console, Syslog server

Strict access control by ACL

Access Switch through AAA or Local Authentication

Support SNTP and NTP Setup time zone and Daylight Saving time

Supervise abnormity of task, memory, CPU, stack, switch chip, temperature and raise alarm Sflow for IPv4 and IPv6

Ping and trace route command

Configuration file storage

Command operation log

Support FTP/TFTP server or client upgrade

Support X-modem protocol transfer the file

 For details, I can send you our full data sheet of it.

 

Enterprise Networking Device - Smart Switches - 28 Port L3 Switch

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.