flake machine decades experience professional service capacity:100-500t/d feature:low noise,high capacity,etc.

Flake Machine

1.bearing house: square type to keep the stability

2.bearing lubricant: take engine oil as lubricant and in cycle use by oil pump

3.hydraulic pump; Automatic adjusting type, if reach the fixed pressure then stop automatically and keep the pressure while the system still in regular running

4.gap between flaking rolls(the thickness of flakes): there is handwheel with scale on the front side of the machine which is very convenient to adjust the gap between the rolls

5.scraper:it connected with a rod and extend to the flakes outlet which is very convenient to be adjusted, also there is a pin-lock system to keep the shelf life of the scraper.

The technical parameters as following:

  

Model	2*81*220	2*80*150	2*80*125	2*80*100
capacity	450-500t/d	300-350t/d	180-230t/d	100-150t/d
power of main motor	160KW	55kw-6phase/2	37kw-6phase/2	30kw-6phase/2
flaking roll size	Φ810X2200mm	Φ800×1500mm	Φ800×1250mm	Φ800×1000mm
speed of flaking roll	275r/min	281-320r/min	281r/min
thickness of flakes	0.25-0.35mm
power of feeding roll	1.1kw	0.75kw	0.55kw
speed of feeding roll	0-84.7r/minVariable speed			33r/min
power of oil pump	2.2kw		1.1kw
working pressure of hydraulic system	5-6MPa(as to  output)	3.5-4Mpa(as to output)	3-3.5Mpa(as to output)
machine size	3574X2412X2285mm	2650×2230×2090mm	2400×2230×2090mm	2150×2230×2090mm
weight	20T	16T	13T	10T

flake machine