Oscilloscope SM5010 spectrum analyzer is used for the early test in the development of electrical products

Oscilloscope

SM5010 spectrum analyzer is used for the early test in the development of electrical products, troubleshooting of CATV/MATV system as well as the test and trouble diagnosis of cellular phone/paging systems. Combined with the near field probes of Mz530, it can detect the missing fields of radio frequency.

  

Specifications

Input frequency response 0.15-500MHz, 3dB Display accuracy of central frequency +/-200KHz (frequency sweep width +200KHz) Accuracy of mark frequency +/-0.1% (frequency sweep width +100KHz) Frequency display resolution 100KHz (4½ bit LED display) Frequency sweep width 0.1MHz/div-100KHz/div with 1, 2 and 5 step system.And 0Hz/div (0 frequency sweep) accuracy: +/-10% (each range) Intermediate frequencybandwidth 20KHz and 400KHz Video filter (When on) 4KHz Amplitude range -107~+13dB Reference level -27dB~+13dB (10dB for every step) +/-2dB Average noise level -97dB(20KHz intermediate frequency width) Display range of CRT screen 80dB(10dB/div) Display range ofvertical display +/-2dB (2 With attenuator) 250MHz signal Input attenuator 0-40dB (4x10dB step) error: +/-1dB/10dB Maximum input level +10dBm,+25V DC(Input attenuator set at 0dB)+20dBm (input attenuator set at 40dB) Frequency stability Over 150KHz/hour Input jack type BNC Input impedance 50Ω Power supply 220V/110V +/-10%; 50Hz/60Hz   Tracing signal generator Input frequency response 0.15-500MHz, 3dB Output level range -50~+1dBm (4x10dB): +/-3dB Output attenuator 0-40dB (4x10dB step) error: +/-1dB/10dB Input jack type BNC Input impedance 50Ω   Others DC output +6V (for probe) AM demodulation output Load impedance ≥16Ω

Oscilloscope SM5010