Ads by Google
We are authorized distributor with product quality and after-sales service guaranteed.
Features and Benefits:
20 MHz bandwidth,100MS/s Real-time Sample rate,Single channelUSB interfaceUSB-stick to save data portableSupport alternative triggerAdvantage video trigger function and optimize trigger sensitivityRecord length 6KTrue RMS multimeterDual independet galvanic separated(for multimeter and between oscilloscope and multimeter)Auto-scale and auto-setup function in oscilloscope modeSafety: CAT II 400 VApplication:
Design and Debug Circuit function testEducation Technical trainingMaintenance testingSpecification
Bandwidth | 20MHz | |
Sample rate (Real time) | 100MS/s | |
Horizontal Scale(S/div) | 5ns/div~100s/div, step by 1~2.5~5 | |
Rise time (at input, typical) | ≤17.5ns | |
Channels | Single | |
Display | 3.5”color display with TFT panel(320×240 pixels) | |
Input impedance | 1MΩ±2%,in parallel with 18pF±5pF | |
Probe attenuation factor | 1X,10X,100X,1000X | |
Max. input voltage | 400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1) | |
Record length | Max.6000 points on each channel | |
Interpolation | (sin x)/x | |
Input coupling | DC, AC, GND | |
Acquisition modes | Sample, Peak Detect and Average | |
Vertical resolution (A/D) | 8 bit | |
Vertical sensitivity | 5mV/div~5V/div(at input) | |
DC gain accuracy | ±3% | |
DC accuracy(Average) | Average>16:±(3% reading+0.05div) for V | |
Trigger type | Edge, Video | |
Trigger mode | Auto, Normal, Single | |
rigger level | ±6 divisions from screen center | |
Automatic measurement | Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot, Pre-shoot,Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A-> B ,Delay A-> B | |
Waveform math | Unavailable | |
Waveform storage | 4 waveforms | |
Lissajou’s figure | Bandwidth | Unavailable |
Phase difference | Unavailable | |
Communication interface | USB | |
Cymometer | Available | |
Power supply | 100V-240V AC, 50/60Hz | |
Li-ion battery | 7.4V, 6 hours operation | |
Multimeter Specifications
Full scale reading | 3¾digits (Max.4000-count) |
Input Impedance | 10MΩ |
Capacitance | 51.2nF-100uF:±(3%±3 digit) |
Voltage | VDC: 400mV, 4V, 400V: ± (1±1digit) Max. input: DC 1000V, VAC:4V,40V,400V:±(1±3digit) Frequency:40Hz-400Hz, Max: input: AC 750V(virtual value) |
Current | DCA:40mA, 400mA:±(1.5%±1 digit) 20A:±(3%±3digit) DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 20A:±(3%±3digit) |
Impedance | 400Ω:±(1%±3digit), 40Ω |
20MHz signal oscilloscope,scope oscilloscope,signal oscilloscope,oscilloscope handheld