Ads by Google
1.production photo
2.Technical Data
| Technical Data | Unit | DB621 |
| Passage width | mm | 600 |
| Throughput rate | p/m | 40 |
| Power supply | V(ac) | 220~240 |
| Operational voltage | V(dc) | 24 |
| Max power consumption | w | 32 |
| Frequency | hz | 50~60 |
| Prectection level | ip | 44 |
| Working temperature | -25~+70 | |
| Electro-magnetic drive | DC | |
| Dimension excluding bars | mm | 1400x300x980 |
| Net weight including bars | kg | 110 |
3.Metrial Processing
4.Pure Manual Welding
5.Pure Manual finishing
6.Fixed Acrylic
7.Driver control board
1). The PCB board is developed by our company.
2). The PCB board be processed by listed company .
8.Testing
1). Check the wiring
When connected power debugging, please check the wiring diagram according to each parts of the line is connected.
Note: protective earth wire of equipment must reliable grounding, otherwise don't allow debugging.
2). Function test
(1) Turnstile actually pick two way signal (come in and out ).
(2) if the installation has LED indicator light on the surface, if the control PCB board receive the legitimate signal , turnstile will have green arrows in the direction.
9.Package and Delivery
10.Warnings
Before starting installation, you must pay attention to those notes:
1.Before starting installation and operation or maintenance, cut off power supply.
2.The product must be earthed, and an earth leakage breaker is necessary on the power supply.
3.Do not change the original inside wiring.
4.Keep the automatic control (push-button , remote control , etc) out of the reach of children .The control system must be installed at a minimum height of 1.5mm the ground surface.
5.Never open the door or the cover of the cabinet when the machine is working .
11.Maintance
1.It is forbidden for those non-specialists to open the cabinet to carry out adjustment, maintenance and service of the product.
2.The housing of the equipment is of a sub-polish stainless steel. It is required to clean regularly with soft cloth so as to keep a clean and polish surface. It is forbidden to clean the surface with a hard object, otherwise, the good looking appearance may be affected. It is also forbidden to wash it with water, otherwise, short circuit may occur in the electric control system and the equipment may be damaged.
3.It is required to check regularly the connection of various movement sections of the equipment to avoid loosen fasteners, otherwise, turnstile failure may be resulted due to long term operation.
4.It is required to apply lubricant regularly to the movement sections.
5.It is required to check regularly the connection socket and connectors of the lines to ensure a reliable connection.
6.It is required to check regularly the protection grounding of the system to ensure a reliable connection.
7.It is required to recover the protection housing of the circuit and close properly the cabinet door after checking and maintaining properly the product.
12.Certification
13.Project Case
14.About us
Thank you very muck for your view !
Any question , that will be appreciated !
Tel:86-755-29010765
Fax:86-755-29164103
Mobile:86-13825269270
security smart 304 stainless steel flap barrier turnstile gate