Welcome to ECVERY
manual metal grommet machine
manual metal grommet machine
Supplier Info
[China Supplier]
Contact Person : Mr. Chang John
Tel : 86-371-67420589
Fax : 86-371-67420589
Product Detail
Application: Fabric, Canvas, Banner, Poster, Sailcloth, Flexible materials, etc.


Grommet size: Specific grommets match with the machine, 4# and 5# grommets

Gross Weight: 6 KGS


Fabric, Canvas, Banner, Poster, Sailcloth, Flexible materials, etc.


Normally we make the eyelets onto the destination pieces with a couple of male and female grommets. And in the operating process, it should be firstly to set  onto the pressing die with male grommet together with the other female one, and it is also need alignment for the pressing operation. When the pieces are fed ready for grommeting, the grommets may be damaged to waste easily by any deviate from the aiming way, and also may be scraped in case of any mistake from pieces feeding and unbalanced pressing operation. Our new type machine has the creative revolution from the traditional grommet fixing method. It needs just one male grommet for fixing, and need no female one any more. So the fixing speed is 5 times faster. And the operation is more convenient. One worker can make 30 eyelets per minute, and it is may cause almost no damage in the operation. On account of using the one grommet, and it can surely reduce the processing cost. I has commonality and feasibility on the consumables and also be portable for convenient use. It can use not only specific grommets but also the common 4# and 5# grommet. The strength of eyelet that can be endure is the same as the traditional way. For it has no touch between the metal eyelets, so the eyelets are not easy to rust.


1.Usually, a couple of grommets are made on the banner fabric, while our machine just use only one grommet to make the eyelet.

2. The good for using one grommet is the fixing speed can be 5 times faster than using a couple of grommets.

3.The operation is more convenient and the worker can make 30 eyelets per minute(1800 eyelets per hour).

4. The machine can reduce the material cost by using one grommet.

5. The eyelets are not easy to rust by using one grommet in this way.

manual metal grommet machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.