Ads by Google
ESP Electric Dust Collector
Advantages:
Excellent adaptability; versatility; good Processing capacity, excellent reliability ; High efficiency, Anti- heat
widely used in Power plant, metallurgy , cement, etc , to remove the dust with high temperature
Deal with f millions of cubic meters dust per hour
Overhaul period is 10 years
Dedusting efficiency higher than 99.8%
it is one of ideal equipment that preventing air pollution Because of these obvious advantage as well as small running resistance, low operating cost and maintenance.
Item | SDD 10×3 | SDD 12.5×3 | SDD 15×3 | SDD 25×3 | SDD 45×3 | SDD 30×3 | SDD 35×3 | SDD 40×3 |
effective cross sectional area (m2) | 10 | 12.6 | 15.1 | 20.2 | 25.1 | 30.1 | 35 | 40 |
air volume×104(m3/h) | 3.24-4.32 | 4.05-5.42 | 4.8-6.46 | 6.45-8.6 | 8.05-10.9 | 10.78-12.56 | 12.04-15.82 | 14.8-17.52 |
electric field wind speed(m/s) | 0.9-1.2 | 1-1.2 | ||||||
under pressure (pa) | -6000-0 | |||||||
flue-gas temperature (°C) | ≤300 | |||||||
design efficiency (%) | ≥99 | |||||||
loss of pressure (%) | ≤294 | |||||||
air leakage ratio(%) | <3 | |||||||
electric field number/champers | 3electric field /single champer | |||||||
Electric field length (m) | 3.5×3=10.5 | |||||||
high pressure power supply number | 3 table | |||||||
High tension current (A) | 0.1 | 0.3-0.4 | ||||||
voltage value (KV) | 72 | |||||||
Contour size of the equipment length×Width×Height (m) | 14.8×5.6 ×10.41 | 14.8×5.6 ×11.21 | 15.4×6 ×11.51 | 15.8×6.4 ×12.51 | 15.8×7.2 ×13.1 | 15.8×7.2 ×13.1 | 16.7×7 .2×14.1 | 16.7× 8.08×14.86 |
SDD electrical dust collector