Welcome to ECVERY
Fabrics Laminating Machine YA-01K
Fabrics Laminating Machine YA-01K
Supplier Info
[China Supplier]
Contact Person : Mr. Xiong Cain
Tel : 0086-0769-85157716
Fax : 0086-0769-85158221
Product Detail
1.Laminating machine for fabrics glut-point 2. Dot shape gluing, make fabric soft, good air permeability, evenly 3. Save glue

Fabrics laminating machine


Fabrics laminating machine is used for laminating clothing materials such as laminating high-quality underwear materials with sponge and knitted fabric, jean fabric with polar fleece, and water-proof but air-permeable plastic film such as TPU, PU with various fabrics.


1. The special but reasonable gluing mode makes uniform distribution of material gluing and greatly saves the amount of glue. Both water based glue and oil based glue can be applied to processing the material.

2. The material processed by this machine has the qualities of softness, smooth to the touch, waterproof, air permeability, resistance to dry cleaning and wet cleaning.

3. The original texture of the material will not be changed after being processed ,which can not be reached by the traditional spot-gluing and laminating machine for cloth.

4. It also has a long time suitable without distort and other good characteristics such as even, comfortable handle, permeability.

5. The unique way of cement save glue a lot.


Surface of heating roller is coated with Teflon in order to  efficacious prevent the hot melt adhesive against sticking on the surface of roller and carbonization

7. It equipped with speed regulation system VVVF control, and automatic temperature control system; it also can measure the length, easy to control production output and product quality.

8.Spreading width can be momentarily designed according to the clients requirement to control the cementing amount,diameter of heating roller is optional

9. Adjust the speed of heating roller according to the working requirement,both colloid trough and heating roller can control temperature independently.

10. New design structure, reliable technology, easy operation, low breakdown rate, long service time.

11. High-efficiency cooling device insure the application range of the basic materials.

Range of application

This fabric laminating machine is siutable for producting  as following:

1. Outdoor products making, such as making cap, waterproof breathable TPU, PU with fabric, etc

2. Clothmaking materials, such as fabric with sponge, fabric with waterproof film, fabric with fabric, fabric with fur, etc

Main parameter:







Swift Standard

1500*1830 mm

Working Width

1830mm (72'')

Motive Power

5HP+2HP+1HP(computer VVVF control)

Work Speed

0-45 m/min

Caution for using YA-01K

1. The machine surface should be without watermarks, oil, dust, debris, large drum, mesh belt, rolling wheels, idler pulley, plastic pots, plastic roller, pulp wheel, knife plate should wipe, wash clean.

2. Strictly prohibited on-load open, barrier gate.

3. Motor can never exceed the load (110%); accelerate, deceleration turning "speed adjustment" knob should be careful, and gradually transferred to the required speed, or easily damaged motor.

4. Forbid to operate "positive inversion switch" when machinery is in running, otherwise fragile to damage converter and motor.

5. To adjust the wheel of stepless variable speed machine can fine-tune the tightness of gluing when machine running, keep material speed synchronous with the heating roller, but prohibit to rotate the hand wheel when machine stop, (that is to say can not change speed), Otherwise, easy to damage stepless gearbox.

6. Keep waxing regularly on stepless gearbox, motor belts, often add oil in chains, bearings, cylinder stroke, and change oil regularly in worm gear reducer to ensure its lubrication, running well.

7. Under normal circumstances, "Manual / Auto" switch of electrical panel box should be at "automatic" position, electric eyes, limit switch works, or else mesh belt does not adjust automatically lead to run out the roller (accompanied by alarm sound continuously), in this case, stop as soon as possible, and re-adjust the location of mesh belt.

8. Mesh belt adjusted edge automatically only when the main engine in the "Forward" situation.

9. When work stopped, if the temperature table shows heated roller temperature above 80 degrees, it is prohibited strictly to stop running big rollers, or else damage mesh belt due to high temperature, it at your own risk, our company is not listed income within the scope of the warranty. Therefore, must let the mesh belt (big drum) keep running until the temperature below 80 degrees table showed, then stop. Out of work, the rubber roller are not allowed to pressure on the heated wheel, free state must be left vacant place.

10. Handle scraper board carefully, otherwise easy to damage the gluing embossing roller.

11. Big electric box should open regularly t check the time relay and intermediate relay whether loose or not, inside dust, cotton and other dirty (miscellaneous) material to be removed regularly to prevent blockage of cooling channel converter inconvenience of the machine.

12. Inverters data has been set well before leaving the factory, non-professionals is strictly prohibited to change, set, disassembly and repair.

Fabrics Laminating Machine YA-01K

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.