XCLP1-120/160 type Longmen Cutter Press
This series machine adopts by motor through v-belts and two pairs of helical gear drive, through the crankshaft on workbench upper eccentric exercise, reach cutting function, 64mm trip (maximum thickness for cutting work 64mm).1. This series of machine is gantry, Longmen width is Adapt the cloth or a large leather raw materials which through ,for a small materials by cutting knife mould can pay two ends in operation, and greatly improve the efficiency.
2. on the table for iron materials, durable, also does not damage of transient overload.3. helical gear and sliding copper bearing, Carrying capacity, Movement balance, the noise is small.4.upper and lower table adjust using worm transmission distance, a plane thrust bearing, flexible adjustment, light.5.This series of machine, through calculation, Besides considering strength and transverse dimensions of different wallboard, except Slide block , workbench, The worm, crankshaft are using ,Maintenance extremely convenient
6. It is equipped with feeder device.
Specification Parameters
Cutting force | 100KN 120KN 160KN |
Motor power | 3KW 4KW 5.5KW |
Cutting area | 1000mm 1200mm 1600mm |
Cutting thickness | 64mm64mm 64mm |
Cutting frequency | 38sir/min 38sir/min 38sir/min |
Pressure | 100KW 140KW 160KW |
Adjustable distance between up and down operating platform | 50-200mm 50-200mm 50-200mm |
Size | :960*1530*1200mm 700*1730*1300mm 700*2200*1300mm |
Weight | 1200KG 1400KG 1800KG |
(We accept special order.)
Longmen Cutter Press