Digital amplifier With LED Lighting Bluetooth Audio bluetooth speaker
Product description Model AG-0505
The model AG-0505 of LED lighting with Bluetooth audio combines LED energy-saving lighting and sound technology together. The outer ring is the ring luminescence band, which can brighten the light of warm white or cool white. A small-caliber and high-powered full-range speaker is located in the middle area, and music player rise well. Bluetooth audio receiver is suitable for all kinds of products with Bluetooth, such as mobile phone, MID, notebook etc.
Technical indicator | |||
No. | Item | Data | Condition |
1 | Output voltage(AC) | 90~245V | 50/60Hz |
2 | Input power(Po) | ≤15W | 220V/50Hz |
3 | Power factor(PFC) | ≥0.9 | |
4 | Power efficiency(η) | ≥82% | 220V/50Hz; Work at full capacity |
LED lighting indicators | |||
5 | Source power(Pw) | ≤4.5W | |
6 | Luminous flux(Lm) | ≥500 | |
7 | Color rendering index(CRI) | ≥0.7 | |
8 | Color temperature(K) | 5500-6000 | |
9 | Light decay(If) | ≤3% | 3000H; Ta=25° |
10 | Illumination angle(°) | ≥160 | |
11 | Dimming | 32-step digital | |
Audio amplifier indicators | |||
12 | Audio output power(PL) | 3W | F0=1KHz; PL=1W |
13 | Frequency response(F) | 20-20KHz | PL=1W; |
Unevenness+/-3dB; | |||
14 | Signal to Noise Ratio(SNR) | ≥80dB | PL=3W; A-weighted |
15 | Audio distortion(HTD+N) | ≤0.5% | PL=1W; F=1KHz |
16 | Volume control | 32-step digital | |
17 | Bluetooth transmission distance | ≥10M | No obstacle |
18 | Infrared control distance | ≥10M | No obstacle |
Use of environmental indicators | |||
19 | Application Environment(°) | -20~60 | |
20 | Storing Environment(°) | -40~70 |
ID Chart illustration
1 Instructions of use
1.1 Each package contains a host of LED lighting with Bluetooth audio, an infrared remote control, manual and warranty card;
1.2 Open the box, and remove the host and the remote control;
1.3 Turn off the switch, screw the host into E27 socket, and tighten it a little harder. Turn on the light LED lights after around 1 second (brightest state). At this time, the audio features in the standby state.
1.4 Remove the insulating film in the battery compartment of remote control, the power of remote control is energized. At this point, the host can be controlled by the function keys on the remote control.
1.5 Hold down the Bluetooth pairing key to be when you see the blue color flash on the host, release the button. At this point, the Bluetooth of host is in pairing. Open the Bluetooth device which need connect find automatically to be a “LA-5050” Bluetooth devices display, connect the matching. When blue LED of the host light and dark flash slowly, the Bluetooth pairing is successful.
1.6 The host will remember automatically the connected device without matching again, after pairing is successful. When access to the new Bluetooth device, repeat the 3.5 process. The host will record the last paired device automatically.
Digital amplifier with led lighting and bluetooth receiver which is suitable for mobile phone MID notebook with Bluetooth