electric accelerator pedal switch 1.Pedal travel :20 2.Protection class:IP67 3.Resolution:0.01 4.Opera-temp: -40C~+85C

PA1/PA2 series electric accelerator pedal switch

1. PA1 Series Introduction

·Precise electronic accelerator pedal

·Pedal  travel: 20±1°

·Working voltage:DC5~16V

·Synchronicity:≤0.5%

·Linearity:≤±1%

·Operating temperature: -40~85°C

·Protection class:IP67

·Lifetime: ≥3,000,000 times

·Weight: Approximate 764g

·Standard connector:AMP 174264-2

·In accordance with the requirement of body mechanics, elegant appearance

·Electromagnetic interference shielding, redundant design and high reliability

·Stainless steel foundation, cantilever type installation, high strength and easy to install

·High precise conductive plastic substrate and multi-finger alloy brush, good wear resistance, and long lifetime

·Fiber reinforced nylon and anticorrosive steel component structure, can be used for the car to work in harsh conditions

·Scope of application:

  Matched with accelerator controllers on common-rail or mono-block pump EFI diesel engines which manufactured by Dalian Engine, Yuchai, Dongfeng Chaoyang Diesel, CNHTC, Shanghai Diesel Engine, Weichai Power, DCEC, Wuxi Diesel Engine, etc.

2. P1 Series Performance Parameter

Electric Parameter
Rated voltage	DC5× (1±0.1 % )	V
Maximum power supply voltage	DC16	V
Resistance	APS1(2.2),APS2(4.4)	KΩ
	3	KΩ
Resistance tolerance	20%
Temperature coefficient	≤400	PPM/°C
Pedal travel	20±2	º
Linearity	≤±2	%
Repeatability	≤0.1%
Wiper working current	≤1	uA
Max wiper working current	10mA	mA
Insulating resistance	≥100 (500V)	MΩ
Environmental parameter
Lifetime	≥3	Million times
Operating temperature	-40~+85	°C
Storage Temperature	-40~+95	°C
Protection class	IP66

3. Photo :

PA1/PA2 series electric accelerator pedal switch