Safety strap Strong belt and easy to install Secure your furniture and prevent your children from getting injury

Deluxe Furniture Straps

Tools Needed:

        Phillips screwdriver, ruler, drill and pencil. Also recommended-electronic stud-finder.

Note:

     Studs are usually on 16” centers.

To Install:

Locate wall studs behind furniture. Mark stud locations on wall at top of furniture.

Note: Use two straps per piece of furniture when possible. Each strap mounts to a separate stud.

Slide item away from wall.Drill a pilot hole into the wall studs about 8” below the top of furniture.

  STEP 1-3

Attach the short end of the strap to the wall stud with the 2” screw provided.Using both of the 1”screws, attach the other end of the strap to the top of furniture for tall pieces of furniture (i.e. bookcases) or to the back of furniture for lower pieces (i.e. dressers). Attach where wood is at least 3/4” thick.

STEP 4-5

        Slide furniture back into position and tighten each strap by pulling upward. Pull free end of webbing until there is no slack.

   STEP 6

       Important: Webbing must be inserted through underside of buckle for strap to operative effectively.

Purpose:

     Secure your furniture to a stable surface or wall especially during an earthquake.

     Prevent your children from getting injury when pull the future and cause accidental cases.

Note:

     This product is designed to help minimize accidents and is not a substitute for adult supervision.

Deluxe Furniture Straps