1,material:pure poplar wood 2,size:1220*2440mm 3,thickness:18mm 4,high quality with reasonable price

1,SPECIFICATION

  Size 1220*2440 or according to buyers' requirements   Thickness  2-18MM  Glue  E1,E2  Density  Approx 730~780kg/m32,PROPERTIES   Moisture 4%-13%  Tolerance +/-7%  Modulus of inner combination 0.45MPA  Modulus of surface combination 1.2MPA up 3, Formaldehyde emission level  E1 Average under 1.5mg/L. i.e. under 9mg per 100g   E2 Average under 5mg/L. i.e. under 30mg per 100g  Surface  sanding / pressed   Screw holding face  1300N  Screw holding edge  800N4,Uses  It is widely used for cabinets,wooden door and other furniture,etc.

5,Advantages a.It is dense, flat, stiff, has no knots and easily to be machined.b. It does not have an easily recognizable surface grain, because it is made up of fine particles. c. It can be easily painted to produce a smooth surface. d. It has low "tear out," which means that when sawed, the end has a smooth cut instead of a jagged edge. This also means that a coat of primer and a couple of coats of paint take well, leaving an attractive, finished surface unlike other composite wood products. e. MDF has good Density: profile with high bending strength and modulus of elasticity, dimension stability.f. The MDF also with low formaldehyde content, smooth stable surface of MDF make it an ideal substrate for surfacing with decorative paper or PVC foils and direct painting.

 

we use international advanced equipment Defibrator Andritz Austria to produce mdf wood with the features of structural uniformity, smooth and delicate, and with annual output of 200,000 cubic meters. Products are exported to all over the world.

      

    

Light Colour MDF Board With High Density