Welcome to ECVERY
DSLR support rig
DSLR support rig
Supplier Info
[China Supplier]
Contact Person : Ms. liu Linda
Tel : 86-631-5762869
Fax : 86-631-5762142
Product Detail
1,DSLR support rig 2, low weight, high strength 3, 15mm outerdiameter

1, DSLR support rig manufacturing technology

roll-wrapping technique is used to manufacture 15mm support rods, which means the carbon prepreg is laid up on the mandrel, wrapped by heat-shrink to make sure the resin distribute evenly in the oven.

2, Closer OD tolerance to make sure the smooth movement.

the tolerance ranges from 0 to (-0.05mm), and it is well fit for the DSLR support rig.

3, surface option

3k surface is the best choice of the DSLR rig. It is good-looking, sanded smooth.

DSLR support rig

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.