Frees sticky valves, lifters and rings Allows oil to flow freely to all parts of engine

Aristo Engine Motor Flush, frees sticky valves, lifters and rings, allows oil to flow freely to all parts of engine.

Features:

*  Frees sticky valves, lifters and rings.

*  Allows oil to flow freely to all parts of the engine

*  Should be used at least twice a year or every 5,000-6,000 miles at time of oil change

*  Recommended for use prior to engine overhaul.

Details:

product name	Aristo Engine Motor Flush
item	AC-7-311
content	400ml/can
carton size	275*205*205mm
package	12cans/carton
20ft loading capacity	2500cartons/20'FCL

Instructions:

1.       Use Arito Fast Motor Flush just before changing oil.

2.       Turn of engine and check oil level to make certain that oil is near full mark. Leave old oil filter in place during cleaning.

3.       Add one can Fast Motor Flush to oil in crankcase. Replace oil filter cap, start engine and run at normal idle for approximately five minutes. Do not drive vehicle or race engine until crankcase has been drained and fresh motor oil installed.

4.       Shut off engine and drain crankcase immediately. Replace drain plug and install new oil filter.

5.       Refill crankcase with fresh motor oil. Start engine and allow to idle for a few minutes to assure proper circulation of new oil to all vital parts.

Loading Ref.:

  

Engine Motor flush