Ads by Google
Oxide Ball Mill Making Machine of Battery Equipment
a) Model L two-stage Lead Ingot Feeder, the first stage is Chain type, the second stage is roll type.
b) The cutting system is composing of electric-heating melt pot; lead cylinder casting machine; lead lump cutting machine. The electric-heating melt pot is made by thick steel board. The granulate elevator is connect with cutting machine and conveyor granulate into silo.
c) The volume of silo is 30Ton, the automatic feeding machine connect with silo and it will feed granulate based on the oxide ball drum.
d) Oxide ball drum is the core part for the whole line system. Its running by main electric motor. The positive high pressure blower pipe was installed in the drum. When we start the machine, the lead granulate was rubbing each other and the temperature will raise, and then the face of lead will oxidant and off. During this process, the wind will be supply of positive high pressure blower and the oxide was conveyor into bag house and collected. The main motor power is 37 kw.
e) Oxide silo and conveyor system is composing of two silos (30ton); 5sets pipe conveyor; 2sets pipe elevator.
f) Its was controlled by PLC. The PLC was made by Wuxi Xinjie, China. The touch panel is made by Canada. Other electrical components are made by Zhengtai, China.
2. Feature:
a) It has rise pipe at oxide discharging ports and fitted with return screw; course oxide and lead balls can be push back into drum, preventing lead ball from going into bag house. Its easy to get oxide with lower apparent density.
b) The oxide ball drum is use the rolling bearing type. Its easy to maintain.
c) Real-time monitoring and adjustment to all process parameters via touch operation panel and PLC. To be ensure the process parameters to be kept within the preset range as well as keeping oxide mill running stably.
d) The temperature is controlled by many temperature measure points inside the drum. When actual temperature at one point exceeds target value, water cooling system will activate automatically. The cooling time of which is controlled automatically so to keep the inner temperature within the present range.
e) The lead granulate are directly fed to main drum from the granulate silo, the feeding machine adjusts feed rate continuously according to power duty of main motor, ensuring even continuous charging of lead granulate and discharging of oxide.
Technical specification:
Apparent density: 1.3-1.5g/cbm or 1.55-1.8g/cbcm
Oxidation: 70%-80%
Sieve Residual(100mesh) ≤2%
Iron≤40ppm
Oxide Ball Mill Making Machine of Battery Equipment