Ads by Google
SWITCH DIN RAIL POWER SUPPLY SINGLE TYPE DR SERIES DR-15
1. Features
1. International general full scope exchange input
2. Protect categories: short-circuit/ load/ overvoltage
3. Natural air-cooled
4.Install track: TS-35/7.5 or TS-35/15
5. Insulation Class: 2 scale-up.
6. LED power instructions
7. No-load consumption<0.5W
8. 100% loaded with aging test.
9. DR-15-24 Switching Power Supply SMPS Din Power Supply 15W
10. 2 years warranty
2. Specification
| Model | Output | Tolerance Voltage | Ripple and Noise | Efficiency |
| DR-15-5 | 5V, 0-2.4A | ± 2% | 80mvp-p | 77% |
| DR-15-12 | 12V, 0-1.25A | ± 1% | 120mvp-p | 84% |
| DR-15-15 | 15V, 0-1A | ± 1% | 120mvp-p | 84% |
| DR-15-24 | 24V, 0-0.63A | ± 1% | 150mvp-p | 85% |
1. Start, rise time: 1000ms,50ms/230VAC; 1000ms,50ms/115VAC (full)
2. Keep time: 70ms/230VAC; 16ms/115VAC (full)
3. Voltage range: 264VAC or 120~85 to 370VDC
4. AC current: maurice A/ 115VAC; 0.48A/ 230VAC
5. Surge current: cold start, 35A/115VAC; 65A/230VAC
6. The load of the rated output power: 105%-160%
7. Working temperature. humidity: -20~+60°C, 20~95%RH
8. Storage temperature, humidity: -40~+85°C, 10~95%RH
9. Electromagnetic tolerance: comply with EN55011,EN55022 (CISPR22),EN61204-3 scale-up B
10. Harmonic current: conform to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204, EN61000-6-2, EN61204-3, grade a heavy industry standards.
11. Dimension (W*H*D): 25*93*56 mm
3. Mechanical Dimension:
4. Certificates:
5. Please Note:
1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.
2. Error, include the setting error, line stability and load stability.
3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting.
4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage.
5. Load stability test: the load is from 0% to 100%, others 60%.
DR-15-24 Switching Power Supply SMPS Din Power Supply 15W