Model Q-DL/30 is special equipment to checking, maintaining and repairing cable-stayed bridge.

    Model Q-DL/30equipment for cable-stayed bridge automatic maintenance, obtained utility model patents. The patents NO. is ZL97207784.7. Dynamic screen monitor, interval search, continuous video, remote control and manual function can be realized through this equipment..

  This product sets a along-cable automatic up-and-down operating system. In the operating system, there is a video system, which can automatically video-supervise the whole process in  360°and sends the video signal to the surface of bridge to supervise in random screen and save into software for interval search. If the manual function need to work or the cable need to be maintain or repair, as the vector, operating system will transport the staff and materials to the point that is defective and need repair to work.

The following is this products parameters:

Items	Units	Parameters
Rated load	kg	300
Operation speed	m/min	9.3
Detection of cable's diameter		(according to you situation)
Tilt angle of cable-stayed	degree	20 -- 80
Distance of remote control	m	120
Effective drive	G	115(It can work 100 hours)
Temperature of applicable environment		-20 --- +40
Wind speed	m/s	≤10.8(6 wind)
Relative humidity		≤90%(25)
Electrical power	KW	2×2.2
Braking torque	N.M	2×15
Rated upgrading power	KN	2×7.85
Rated voltage	V	AC380±5%
Weight of maintenance equipment	kg	470
Weight of the whole machine	kg	1000
The minimum braking rally to tracing wire-rope	KN	2×68.5
Size of frame(length×width×height)	mm	2000×1000×1720

Note: this equipment has no standard provision. We will design the product according to your situation. The distance of the remote control, the tilt angle of the cable, the diameter of the cable, applicable environment, and so on, all of above will decide the size of the product you ordered. So, before ordering the product, please communicate with us so that we can provide the most accurate size product to you.   

overhaul vehicle for bridge