Welcome to ECVERY
Cutting Machine(for AAC Production Line)
Cutting Machine(for AAC Production Line)
Supplier Info
[China Supplier]
Contact Person : Ms. Gu Michelle
Tel : 86-519-89883750
Fax : 86-519-89883760
Product Detail
Germany technology Capacity: 50,000m3-300,000m3 AAC cutting machine(aerial turnover) more than 2 patents

I  Introduction

Cutting Machine is a main equipment of AAC Production Line. The annual production capacity of 50,000 M3and above, this machine is a core machine.

It is an indispensable equipment to improve the quality of production. This machine put the semi-block in one step, cuts the in Hexahedron-type.

Because of the advanced technology, it reduces the damage of the block of the second hoisting. So, the products sell well all over the country, and won the overwhelming majority of users.

II  Features

1)  The machine structure is simple and practical, the maintenance is easy;

2)  The green cake is sideward, so the width of the whole green cake is 600mm, and the height is 1200mm. Steel wires for cutting is short, which is also difficult to rupture and float. It is high in cutting precision;

3)  The vertical cutting device is fixed. Crosscut device cuts the green cake vertically by steel wires. It shortens the cutting steel wires length, guarantee precision of cutting;

4)  This machine cuts the green cake in Hexahedron-type, so the products quality won’t be influenced by the distortion of the mould;

5) Cylinder Tension, which supply gas to each wire respectively;

6)  Avoiding the wires being stretched off by using a special device;

7) Life of the wire can extend (Usually 10 days, Now 20 days);

8) Operating it in use of the computer touch panel, realize separation of Man-Machine.

III  Technical Data

Serial number

Name

Unit

Target

Remark

1

Production Capacity

M3/Year

5-15

Annual

2

Size

M

4.0×1.2×0.6

Net

3

Number of Mould

mm

5/10

Vertical

 cutting/ crosscut

4

Cutting Precision

mm

±2,±1,±1

Length,Wide,Height

5

Product Cycle

min/Mould

5

  

6

Weight

t

22

  

7

Electric Capacitance

kw

18

Vertical

 cut/ crosscut /Hydraulic

IV  Work Principle

1)        Aerial turnover crane brings the base body in to sky, turnover 90°,puts it onto the cutting car, cuts the base body with side panel which is powered by electric and walk to stay, finish cuts vertically.

2)        Cutting car continues walking after the central position of the crosscut device stops, the crosscut device is started, crosscut shelf cuts the block from top to bottom in vertical cutting.

3)  Cutting car walks to organize into groups. The hanger hangs the block body to raise Curing car, cutting car returns to primitive position to carry on the next cut circulation.

Cutting Machine(for AAC Production Line)

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.