Ads by Google
Model:75-200-600 metal Floor deck roll forming Machine
panel pattern:
| Type | 60-211-845 | Application | ||
| Effective Width (mm) | 845 | |||
| Feeding Width (mm) | 1000 | Large-span Wall Panel | ||
| Thickness (mm | 0.6 | 0.8 | 1.0 | |
| Section Inertia (cm4/m) | 18.92 | 26.28 | 32.98 | |
| Section Resistance (cm3/m) | 10.68 | 14.02 | 17.28 | |
1: Configuration
Uncoiler 1 set
Roll forming roller: 11-18 groups
PLC control system 1 set
Hydraulic cutting system: 1 set
Collection table
2: Working Process Flow:
Uncoiling-Coil feeding-Guiding-Roll Forming-Punching (if needed) - Cutting-Collection table
3: Technical Parameters:
A: Power supply:
380V, 3 phases, 50 Hz (can be adjusted according to actual power supply conditions in different countries)
Main motor power: 18.5KW
Pump power: 5.5kw
B:Uncoiler:
Inner diameter: 500mm
Outer diameter: 1100mm loading weight: 5t
C:Forming part:
Feeding thickness: 0.8-1.3mm
Feeding width: 1000mm
Forming speed: 10m/min
Cutting Deviation: 10m±2mm
No. of Roller station: 24 groups
Roller material: Cr12
Material of shaft: 45# steel with heat treatment
Diameter of shaft: 72-90mm
D:Hydraulic System:
Hydraulic pressure: 13-16 Mpa
Cutter material: Cr12
E:Control system:
Full-automatic NC-PLC control system
Control channel: Colored touch screen
F: Size of Machine
Side panel thickness: 22mm
Overall Size: 13000×2000×1550mm
Total Weight: 12T
.
Steel floor plate is of simple shapes, high wave-degree and high strength. When installed, it can be directly mixed with the welded steel mesh and concrete with good adhesion, Applied in high-rise steel buildings, it can save the steel molding templates, and also reduce the floor load. Under the same load capacity, it can reduce the amount of steel to achieve cost-saving.
Features and application: It produced steel floor board for the floor panel of high rise building, with high wave crest and strength, high degree of automation and low cost.
Floor Deck Roll Forming Machine