convenient to install steel roll the advantages of compact structure, beautiful outline, practical

A, Main technical parameters of decoiler

1. Decoil type, hydraulic tense, motor-driven decoil

2. Decoiler motor power,7.5KW

3. Decoiler hydraulic tense oil-pump motor power, 3KW

4. Steel coil inner diameter, φ508mm, φ610mm

5. Steel coil external diameter, maxφ1500mm

6. Steel coil width, 1250mm

7. Bearing weight, 15T

8. Material, SUPER GALUM, galvanized sheet, color plate, mild steel

9. Decoil line speed, 0-20m/min

10. Uncoil hydraulic system pressure,10MPa

11. Control type, multistage auto tracking

12. Machine outline size, 3200mm×1700mm×1800mm

13. Control voltage, three phase, 380V, 50HZ

14. Hydraulic voltage, DC24V

15.Frequency:American Danfoss

16.Swage setting:air operated

B,Structure and instruction

Uncoiling machine adopts cantilever umbrella type, wedge expansion, hydraulic lock, hydraulic correcting.

The characteristics of this machine is it’s very convenient to install steel roll , replacing the arc clamping block and can adapt to different aperture of the steel coil and to ensure that the inner steel plate is not damaged. Uncoiling machine has the advantages of compact structure, beautiful outline, practical, unwinding speed is controlled by frequency converter and automatic tracking the main forming machine speed. Because of high speed steel roll uncoiling, during the deceleration, inertia before the stop is large, the installation of braking device, with the process of rubber pressing roller through a cylinder always pressed plate, preventing the steel plate shaped like a spring release, the base and the body for sliding rail structure. On the base of the machine installed a hydraulic cylinder, when the coil axis and the host have a deviation, the hydraulic cylinder can correct it at any time , ensure the speed of steel plate and the main machine are the same.

C,Hydraulic Loading Cart

Hydraulic fluctuation cylinder route:350mmRoute of the cart:2.5mPressure of hydraulic system:6MpaFeatures of loading cart:The carts includes main cart,V type fluctuation cylinder, cart run system, routeFunction:Used to load and unload the coils, it can move up and down, back and forth.V type fluctuation system is drived by hydraulic, the back and forth is controled by motor.

15T Auto Decoiler