Features:
1. Low investment
2. reasonable structure
3. stable performance
4. long service life
The production line is an automatic production line of ready-mixed dry mortar,
which consists of material supply, automatic measuring ingredients, mixing materials and efficient, pulse dust, automatic weighing packaging, electrical and automatic control system components.
In contrast to job-site mortars, dry mortar is also called pre-mixed mortar, which is produced in the factory with dedicated facilities on batching and blending of ingredients in highly-controlled process. It can be used directly just by adding water in job site. |
It has advantages of consistent quality, controlled inventory, saving time and labour costs. By adding different chemical additives, it has fine properties of bond, thermal and acoustic insulation, crack-resistance, workability, water-retention, wear-proof, anti-corrosion, etc. Dry mortar can match different kinds of new construction materials by improving formulation. These good properties not only improve building's quality and life greatly, but also decrease the usage of mortar in a large degree. The demand for dry mortar has increased rapidly due to its outstanding merit comparing with the mortar made in job-site. | |
|
|
MODE | CAPACITY | AREA | HEIGHT | REMARK | Simple | 1~15t/h | 40m2 | 5~10m | Manual batching and packing | Basic | 5~15t/h | 40-60m2 | 6~10m | Manual batching, automatic packing | Semi-automatic Serial | 5~15t/h | 40~80m2 | 8~12m | Automatic batching of coarse material, manual batching of additive, automatic packing | Semi-automatic Tower | 5~50t/h | 40~100m2 | 10~25m | Automatic batching of coarse material, manual batching of additive, automatic packing | Fully Automatic Tower | 5~100t/h | 60~500m2 | 10~25m | Automatic batching of all raw material and packing |
|
|
1. Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc. 2. Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc. 3. Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildew proof mortar, shielding mortar etc. |
|
1. Binders: Cement, hydrated lime, anhydrite, gypsum. 2. Filler: Silica sand, quartz sand, limestone, dolomite, expanded perlite etc. 3. Mineral admixture: Ground granulated blast furnace slag, fly ash, pozzolana, fine silica powder etc. 4. Water-retention and thickening material. 5. Chemical additives: Cellulose esters, superplasticizer, air entraining agents, accelerating agents, retarding agents, defoaming agents, hydrophobic agents, and etc. |
|
Raw Material Storage Silos : Sand Drying Unit : Bucket Elevator: screw conveyor : Weighing System: Mixer : End Product Silo: Bagging System: Dedusting System : Computer Control System : Air Compressor / Air-phase Balance System Steel Structure / End Products Storage Silos waiting for Delievery |
Automatic Vertical Dry-mixed Mortar Production Line
