Ads by Google
SWG-2B hydraulic pipe bender and tube bending tool, manual hand pump operated, for copper pipe, steel tube, plastic water pipe and coated tubes.
-It is suit for common water pipe, wire pipe, carbon steel pipe, conduit tube, bending the angle 90
-1/2’-2’ can be shaped 90 one time, 2 1/2’ – 4’ can reach suitable radian which must remove pipe and bend pipe five times.
-The upper plate of the new design is cut by one time, it won’t be broken.
This machine could bend pipes toward any direction you want;the largest bending angle is 90°2.Suitable for use in bending brass pipes,steel pipes,hydraulic pipes,coated and uncoated pipes. 3.We can make moulds in other specifications according to customers requirements.
Pump-Operated Hydraulic Pipe Benders used for bending 21-108mm brass pipes,steel pipes,coated and uncoated pipes.
MODEL | MAX.PRESSURE (TON) | MAX.STROKE (MM) | WORKINGRANGE | DIES (INCH) | WALL THICKNESS(MM) | PACKING SIZE(CM) | WEIGHT (KG) /UNIT |
SWG-3B | 19 | 320 | Φ21.3-88.5 MM | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3" | 2.75-5 | 92*40*23 | 100 |
SWG-4C | 21 | 370 | Φ21.3-108 MM | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" | 2.75-6 | 118*43*25 | 155 |
SWG-1A | 6 | 150 | Φ10-25 MM | 3/8", 1/2", 3/4", 1" | 1.5-3.5 | 42*37*11 | 16 |
SWG-2 | 9 | 250 | Φ21.3-60 MM | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" | 2.75-4.5 | 73*32*20 | 47 |
SWG-3 | 19 | 320 | Φ21.3-88.5 MM | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3" | 2.75-5 | 95*40*23 | 98 |
SWG-4 | 21 | 370 | Φ21.3-108 MM | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" | 2.75-6 | 118*46*32 | 149 |
SWG-25 | / | / | Φ10-25 MM | 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1" | 0.8-2.0 | 64*25*16 | 24 |
SWG-22 | / | / | Φ6-22 MM | 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" | 1.0 | 52*31*40 | 4.5 |
SWG-22A | / | / | Φ6-22 MM | 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" | 1.0 | 52*31*40 | 5 |
Smaller pipe bender, only hands operated ok.
SWG-2B hydraulic pipe bender, tube bending tool