Ads by Google
General grade we provide for round carbide cutters.
Grade | Density(g/cm3) | Hardness (HRA) | TRS(N/mm2) (SampleB) | Recommended Applications |
YS2T | 14.45 | 91.5 | 2380 | An ultra fine cemented carbide with tungsten powder and binder cobalt. Good toughness and wear resistance. Suitable for low speed cutting allowing a big rake angle, Ensuring the sharpness of the edges, Bearing a heavy cutting force and Achieving good surface finish. |
YL10.2 | 14.45 | 91.5 1600 (HV3) | 2880 | With good transversal rupture strength and wear resistance. It is suitable for low speed rough turning and milling of heat resistant alloys ,titanium alloys and fiberglass. |
Unit: mm
Specification | Recommend application |
Φ70×Φ8.2×1.05 | Cutting glass product |
Φ85×Φ16×0.25 | Cutting cigarette |
Φ90×Φ19.05×1.6 | Cutting leather belt |
Φ100×Φ15×0.3 | Cutting cigarette |
Φ100×Φ22×0.3 | Cutting fabric and thin film |
Φ100×Φ65×1 | Cutting copper and aluminum foil |
Unit: mm
O .D | Tolerance allowed(O.D) | Tolerance allowed(I.D) | Tolerance allowed(Thickness) |
<30 | +0.5 0 | 0 -0.5 | ±0.1 |
≥30~~<120 | +0.5 -1.5 | +0.5 -0.5 | +0.2 -0.1 |
≥120~~<200 | +1.0 -1.5 | +0.5 -1.0 | ±0.2 |
≥200~~<250 | +2.0 -1.5 | +0.5 -1.5 | ±0.3 |
≥250 | +5.0 -2.0 | +1.0 -3.0 | ±0.5 |
Unit: mm
Outer Diameter | Tolerance of flatness |
<30 | ≤0.20 |
≥30~~<120 | ≤0.25 |
≥120~~<200 | ≤0.30 |
≥200~~<250 | ≤0.35 |
≥250 | ≤0.40 |
We supply round cemented carbide leather belt cutters.
Grade and Specification: Various types available .
We can also arrange production according to your different requirements.
Good service attitude.
Hope to cooperate with you to reach win-win.
If you like it, pls comment !!
Round cemented carbide leather belt cutters