Enery Save - BMS for Large International Companies
Control large number of HVAC and Lights Simultaneously
Easy to use Graphical User Interface
2-way Communication
Show Online the real status of all Air Conditions, Heating, Lights and Blinds in a building. Status include Set Point Temperature, Room Temperature, HVAC Mode (On / Off / Heat / Cold or Auto), Fan Level, Keypad Unlock / Lock, Light On or Off and Blinds Open or Close.
Group Control
Select Single or Multiple Zones or Pre Defined Thermostat and Light and Control them all by 1 press of a button
Easy Installation (no wires)
Wireless Thermostat ensures installation is completed in matters of minutes. Retrofit - install in existing buildings. Simply replace the old thermostat and let it communicate with the master controller over the air by Radio Frequency 433MHz (m
odifiable frequency).
Compatible with Fan Coil
Connect thermostat directly to Fan Coil Units with standard wiring
The thermostat can then communicate with controller Wirelessly or by RS485
Compatible with Central AirCon
Wirelessly Control Central Air Condition with remote control via Infrared
Note: thermostat must be matched with the AirCon brand (Carrier, Daikin, Haier, LG, Mitsubishi, Samsung and more)
Reduce Wiring Cost of Fan Coil
Eliminate the wires between the Thermostat and the Fan Coil.
Connect the Fan Coil to IR interface and the IR thermostat will communicated with it wirelessly by IR (require eye contact)
Simple Setup (no programming)
This is as simple as it can be. If you know how to setup up you smart phone, you will know how to setup this BMS system
Each thermostat and light is given an address. Give it a name. You are done
User Interface in any Language
Each of the Zones, Thermostats and Scenes are named in any name and any language you wis. Names can be modified at any time after. These names are used in messages also
Save Energy – Auto Off
Add wireless Motion sensor to power off Lights and HVAC when room is left empty for preset period of time
Save Energy – Power Meter
System show online the power consumption and calculate the average cost per hour
Save Energy – Fix Set Point
Lock thermostats at optimum set point and ensure user cannot change it.
Ensure thermostats cannot be turned ON by user from the thermostat at certain period of times when unnecessary.
HVAC + LIGHT combined
Thermostat and Light Switches are combined together on the same device for slick design on the wall
Smart Timer – Energy Save
Weekly Timer to power On or Off group of air conditions at certain times
Allow to set holiday dates to bypass the timer automatically.
Optional outdoor temperature sensor to bypass timer if outside conditions are idle
Sleep Timer – Energy Save
Countdown timer ensure AirCon are powered ON only for a preset amount of time to ensure they are power off
Safety First – Fire AC shut down
Automatically Power Off all the air conditions in case of a Fire to ensure smoke are not circulated in AirCon sys.
Interface with Fire Alarm system by Dry Contact or RS232
All Building/s Control
Control all HVAC and Lights in the building/s from main control room
Messages Online
System will display messages about any abnormal status of any device
Local Zone Control by PAD
Control single zone by Android, iPad, iPhone, computer, etc.
Total Central Branch Control
Centrally Control all HVAC and Lights in many buildings around the country
Power Failure Restore
After power failure system will return back to its last knows status
Energy Save BMS for Large International Companies