multiplexer 1. 1~2chs RS232/485/422 multiplex 2. up to10chs optional 3. One fiber port,DIN35,DC24V power suplly

multiplexer

P/N: Cj-mf61-s

Analog signal digital signal fiber multiplexer, 1 ~ 4 chs analog signal, 1 ~ 4 chs digital signal, 1 ~ 2 chs RS232/485 multiplexing, Single Mode, 0~15Km, ST/SC/FC (optional).

----------------------------------------------------------------------------------------------------------------------------------------------------

Description:

Cj-mf 61 series products are a type of multi-channel analog signal, the digital signal, serial ports RS232/485/422 fiber conversion multiplexing equipment. It adopts the latest ARM chip, which is quite stable, reliable low power, supports 1 ~ 4 channels the digital TTL signal/contact closure signal, 1 ~ 4 channel analog (voltage/current), 1 ~ 2 channel RS232/485 or a channel RS422 signal in the fiber alone or multiplexing transmission. It requires no change of the user communication protocol solves the problem of electromagnetic interference, ground ring interference thunder destroys, which greatly improve the signal reliability, safety confidentiality, at the same time solve the problem of traditional mode of short distant transmission. Protection grade is IP30, strengthen cabinet, 35mmDIN guide installation, industrial stard DC24V power supply, possess the protection function of power polarity reverse connect.

----------------------------------------------------------------------------------------------------------------------------------------------------

 Features:Contact closure signal/TTL digital signal interface:

Independent 1 ~ 4 channel input, 1~4 channel output Input mode can be elected by TTL input or dry contacts input TTL input level: input level + (0 ~ 1) V/logic "0", input level + (5 ~ 30) V/logic "1" Dry contacts input: short circuit or open Output modes: the optional for 5V TTL / 24V TTL output, or relay output Relay output form: FORM C(SPDT):

Relay-operating time 6ms Relay release time 3ms Total switch time 10msRelay contacts capacity 1A/24VDC

Transmission delay time: 2 milliseconds The maximum working switch frequency: 50Hz

Analog signal interface:

Voltage/Current analog signal (0-5)V/(0-10)V/(0-20)mA optional Support 1 ~ 4 channel voltage/current analog signal.  Voltage signal interface parameters:

Accuracy 0.5% (atmospheric temperature)Voltage transmission rang (0-5)VDC or (0-10)VDC Input impendency 100Kohm

(4-20 ma electrical flow interface) parameters:

Accutacy 0.5% Time delay <10ms Maximum load capacity 600Ω Input resistance 120Ω RS232,RS485 and RS422 interface:Four configuration mode: double channel RS232 / double channel RS485 One channel RS232 + One channel RS485/ One channel RS422

Work rate set (by mfg only): 0-115.2Kbps at any rate

Fiber optic interface:

Fiber optic wavelength:multimode850nm,1310 nm; single mode1310 nm,1550nm Transmission fiber optic: multimode 50/125 um,62.5/125 um,100/140um;single mode8.3/125 um,9/125um,10/125um Transmission range: multimode 2Km, single mode 20Km. Optional in far distance Fiber interface type: ST, SC, FC optional, with standard ST light interface

Power and protection:

Power:Industrial standard24V(+/-5%)power supply, Possess the power meter protector against fraud function, 5-pin Pluggable Screw Terminal 

Mechanical feature:

Overall dimension:146mm×135mm×53mm (H*W*D) Shell:IP30 Grade of Protection Installation Method: 35mmDIN rail installation Net weight:800g

Working environment:

Operating temperature: -10-70°C(-40~+85°C optional) Relative humidity: ≤90%(no condensation) Storage temperature: -40~80°C

1~4chs Analog&digital Fiber Optic Multiplexer cj-mf61-s