1. Lightning Conductor 2. Un: 110V, Up: <600V 3. In: 2.5kA 4. Transmission rate: 2M 5. Insertion loss: <0.5dB

Lightning Conductor

Application range

LDY-RJ11 series lightning protection devices are applicable to the signal protection of the telephone dialing equipment, which can prevent the system or device from permanent damage or transient interruption arising from inductive overvoltage, overcurrent and the other transient surge voltage caused by lightning or industrial noise so they are widely used to against lightning in electronic communication system device such as telephone fax program control machine room etc

Main feature

Aluminum profile shell, attractive and durable, good shielding effect;Standard BNC conductor convenient to use, reliable connection;Introducing multilayer protection circuit, selecting the latest high-speed surge protection device of quick response, low output residual voltage and super transmission performance.

Main technical data

Type	LDY-RJ11/L	LDY/RJ11/8/16/24
Nominal operating voltage Un	110V
Nominal discharge current In (8/20μs)	2.5kA
Voltage protection level Up	≤ 600V
Response time tA	≤ 1ns
Transmission rate Vs	2M
Insertion loss Ae	≤ 0.5dB
Enclosure material	Aluminum profile
Interface form	RJ11
Operating temperature	-40°c-70°c
Special requirements for voltage	Manufacturing as requested and applied to the special voltage products, such as ADSL, ISDN, DDN, etc.

Installation instruction

1. The protector connected in serial between the signal channel and the protected device;

2. Connect the input terminal to the signal channel, and the output terminal to the protected device, reverse connection prohibited;

3. Connect the earthing wire of the protector to the equalizing ring of the lightning protection system;

4. Invalid system the earthing short circuit or open circuit.

Lightning Conductor