APPLICATION:

TY1 series surge protector is for protecting low-voltage consumer’s installations against indirect lightning discharges and is intended to provide protection in zones 1 - 2 as per IEC 62305.It consists of a high performance varistor block with thermal disconnection device. The plug-in module / base design facilitate replacement of a failed module without the need to remove system wiring etc.

TECHNICAL DATA:

MOV Arrestor:

1) Protection class: Class II, Class III

2) Pole number: 1P, 2P, 3P, 4P, 1P+N-PE, 3P+N-PE

3) Max. continuous operating voltage (Uc)(AC/DC): 150/200V, 275/350V, 320/420v, 385/500V, 440/580V

4) Nominal discharge current (8/20μs) (In): 15kA~30kA

5) Max. discharge current (8/20μs) (Imax): 30kA~ 65kA

6) Protection level Up: ≤ 1.0kV~2.0kV

7) Width of one pole: 18mm

8) Remote contacts: No 

Spark gap N-PE:

1) Max. continuous operating voltage (Uc): 255V/ 50~60Hz

2) Insulation resistance at 100V: > 10 GΩ

3) Follow current If :100A

4) Response time tA: <100ns

5) Short-circuit withstand current: 25kA/50Hz

6) Temperature range: -40°C…+80°C

Surge Protectors (LVD/EMC Test Reports,CE/RoHS/ISO9001 Cert.)