Ads by Google
GS-ZP-200 IF horizontal IGBT induction forging furnace
Advantages of IF (intermediate frequecy) induction heating machine :
Medium Frequency machine, intermediate frequency furnace, medium frequency heating machines, intermediate frequency furnace, medium frequency power supply several advantages: 1. Product start-up performance is very good. It is the use of series resonant circuit, the SCR IF solve difficult problems start. 2. To save energy, heat 1 per ton of steel, power consumption of 320 degrees. SCR frequency than the 20% -30% power. 3. Products almost no higher harmonics. Does not pollute the power grid, transformers, switch does not heat, will not interfere with electronic equipment to run the factory. 4. Saving power transformer capacity: IGW-300 IF: 315KVA power transformer to work. The SCR does not work IF 315KVA transformer, severe fever, and even burned. 5. Products with high reliability, performance starts: The main components were used in all the world's plant components, IGBT transistors produced by Siemens AG of Germany. 6. Product water system with water heat exchanger and water circulation system inside and outside. Distilled water within the cycle is long-term use, the device is not within the scale is not blocked by water, greatly reducing the failure, saving maintenance costs.
Features:
1, Good energy-saving efficient
3, Low maintenance cost: no fragile, expensive tubes;4, Special security, no pressure, eliminating the high risk of electric shock;5, High reliability: modular, integrated, high reliability assurance;6, Simple installation : just connect the power and water, and 10 minutes to complete.;7, Easy operation :a few minutes to learn.
8, Equipped with infrared thermometer and automatially feeder device: air cylinder
Detailed Technical Parameters
Model : GS-ZP-200KW horizontal induction forging furnace
Input power: 200KW
Input voltage: 380V/50HZ
Current: 330A
Oscillation frequency: 2-10KHZ
Efficiency: 100%
GS-ZP-200 KW horizontal IGBT IF induction forging furnace