Ads by Google
Tube-type Multi-polar trolley line
1.Introduction
SL-HFP multi-polar(phase) tube-type trolley wire ,is a kind of safe, economical, reliable device that can be widely used. Meanwhile, it is a reliable alternative of cable shell-off coil cylinder. According to different structure, they can be divided into engineering plastic housing body and aluminum alloy housing body. From the 3rd term, the phase no. can be up to 16 terms. The housing can protect and support traveling rail of electricity-concentrator. The material of generating line is cold-drawing bronze.
2.Main technical Indicator
Indicator | Index value |
Insulation board breakdown voltage | more than 25KV/min |
degree of enclosure protection | IP23 |
test of rated short time withstand current | 20times rated current 1S |
Maximum overload current test | 1.5times rated current 30min |
Dielectric Strength | industrial frequency AC 3000V 1minno breakdown flashover |
Alternate &phase to insulation resistance | R≥10MΩ |
parameters of Pollution level | IV(General electric dust and gel state) |
Operating voltage | AC660V DC1000V |
Fire hazard testing | Qualified Bunsen method, flame retardant performance is good |
Running speed of collector | V≤200m/min |
3.Model and specifications
Transmission catheter( aluminium alloy shell)
Ten polar
Specifications& Model | code number | Cross Section M2 | intercepting A | Resistor Ω/Km | impedanc Ω/Km |
SL-HFJ-10-10/50 | 2009-1001 | 10 | 50 | 1.800 | 1.898 |
SL-HFJ10-15/80 | 2009-1002 | 15 | 80 | 1.125 | 1.193 |
SL-HFJ-10-25/100 | 2009-1003 | 25 | 100 | 0.720 | 0.771 |
SL-HFP-10 Multi-polar Trolley Wire