Analog Input Module
Maximum 4 analog input channels with temperature probe.
The setting of thermistor type of each channel is optional.
Measuring method of each channel: RTD or thermocouple; Connection: 2-wire system, 3-wire system; Measuring accuracy: 16 bits
It's unnecessary to set the hardware, CPU module will load parameters to it automatically after it being started.
It's an intelligent module with self-diagnosis function, it can be automatically reset and restarted if operation failure appeared.
Product Model No. | AIM201-0203 | AIM201-0403 | AIM201-0204 | AIM201-0404 | |
Article No. | 200AIM2010203 | 200AIM2010403 | 200AIM2010204 | 200AIM2010404 | |
Input features | |||||
Input channel | 2 points | 4 points | 2 points | 4 points | |
A/D resolution | 16 bit | 16 bit | 16 bit | 16 bit | |
Signal type | Pt100, Cu50, Cu53, Cu100 | Pt100, Cu50, Cu53, Cu100 | S, T, R, E, N, K, J, voltage range: ±80mV | S, T, R, E, N, K, J, voltage range: ±80mV | |
Error precision | 0.1°C | 0.1°C | 0.1°C | 0.1°C | |
Sensor | 2-wire system | √ | √ | √ | √ |
3-wire system | √ | √ |
|
| |
Refresh cycle | 200ms | 300ms | 200ms | 300ms | |
Common-mode rejection ratio | 120dB | 120dB | 120dB | 120dB | |
Temperature drift | ±100ppm/°C | ±100ppm/°C | ±100ppm/°C | ±100ppm/°C | |
Physical features | |||||
Weight (g) | < 160 | < 160 | < 160 | < 160 | |
Dimension (mm) | 75 x 90 x 68.5 | 75 x 90 x 68.5 | 75 x 90 x 68.5 | 75 x 90 x 68.5 | |
Power consumption (MAX) | 80mA | 80mA | 65mA | 65mA | |
Operation temperature | -10°C ~ +55°C | -10°C ~ +55°C | -10°C ~ +55°C | -10°C ~ +55°C | |
Storage temperature | -40°C ~ +70°C | -40°C ~ +70°C | -40°C ~ +70°C | -40°C ~ +70°C | |
Relative humidity | 5% ~ 95% (non-condensation) | 5% ~ 95% (non-condensation) | 5% ~ 95% (non-condensation) | 5% ~ 95% (non-condensation) |
NA200 Series Programmable Logic Controller (Analog Input Module AIM201) CE approved PLC