DYMO Series Electromagnet (single-phase brake) used for mounting with operation device for TJ2 or JWZ series block brake

APPLICATION

 DYMO Series Electromagnet   (single-phase brake) is applicable to a circuit of AC 50Hz, rated voltage up to  380v, used for  mounting with operation device for TJ2 or JWZ series block brake.

The product is in compliance  with IEC/EN 60947-2

 TECHNICAL DATA

Rated voltage: AC 50HZ 220V, 380V

For long-term operation, TD=100%,  operations/hour≤20;

For short-term operation, TD=40%,  operations/hour≤300, electric life: 60×104

Protection degree: IP00

Technical parameters when operation voltage is not less than 85% rated voltage

Type	Electromagnet torque (N.m) Power continuity 40%     100%	Armature torque (N.m)	Suction current (A)	Rotating angle α	Displacement of Control lever (mm)	Weight (KG)
DYMO-100	5.39              2.94	0.49	≤0.8	7.5	2.6~3	4.4
DYMO-200	39.2      19.6	3.5	≤3	5.5	3.2~3.8	18
DYMO-300	98        39.2	9	≤8	5.5	4.0~4.4	40

DYMO Series Electromagnetic Iron brake