Ads by Google
EC35 SERIES Encoder,ROTARY ENCODER ,shaft encoder,SPECIFICATION | |||||||||||
| 1 | ELECTRICAL CHARACTERISTICS | ||||||||||
| ITEMS | SPECIFICATION | ||||||||||
| 1-1 | Power Rating | DC 5V 0.5mA | |||||||||
| 1-2 | Insulation Resistance | More then 10MΩ at DC 50V 1 Minute | |||||||||
| 1-3 | Withstand Voltage | 1Minute at AC 50V | |||||||||
| 1-4 | Sliding Noise | ≤3mS (Test conditions 360°/S ) | |||||||||
| Using the C/R filter circuit is Recommended. | |||||||||||
| 1-5 | Resolution | 10Pulses/360° for each phase. | |||||||||
| Output signal is 1 pulse per 2 detents | |||||||||||
| 1-6 | Phase-Difference | T=0.25±0.17 T | |||||||||
| 1-7 | Output Signal And Rotational | CCW direction | A Signal | OFF | |||||||
| ON | |||||||||||
| Direction | |||||||||||
| B Signal | OFF | ||||||||||
| ON | |||||||||||
| 1-8 | Working Temperature | -10oC~70oC | |||||||||
| 1-9 | Storage Temperature | -40oC~85oC | |||||||||
| 2 | MECHANICAL CHARACTERISTICS | ||||||||||
| 2-1 | Total Rotation Angle | 360° | |||||||||
| 2-2 | Rotation Torque | 30~200gf.cm.Shaft rotatable at -10oC~+5oC.-10oC~+5oC | |||||||||
| 2-3 | Shaft Push-Pull Strength | 10Kgf.cm | |||||||||
| 2-4 | Number and position Detent | 20 detents(Step angle: 18°±3°) | |||||||||
| 2-5 | Rotational life | 30,000 Cycles Min.at a speed of 600 cycles/H | |||||||||
| 2-6 | Resistance to soldering heat | Manual Soldering:Less than 300 and quicker than 3 seconds. | |||||||||
EC350102X8A-HA1 encoder