Welcome to ECVERY
inductor coil T68-2
inductor coil T68-2
Supplier Info
[China Supplier]
Contact Person : Ms. cheng bella
Tel : 86-0755-84807721
Fax : 86-0755-84897378
Product Detail
inductor coil T68-2 1. International standard 3. Low noise 4. Heat-proof 5. High strengt

power inductor T68-2

iron coreT68-2Physical DespreationOD          15.2mmID          8.53mm   HT          5.94mm  L            3.74mm  A           0.187cm² V           0.699cm³ Colour      red/clear

Electric CharactericsReference Permability     10  AL      6.5NH/N²     

Core Loss Comparation Under Different operating Environment60HZ@500G           19mv/cm³    1KHZ@1500G         32mv/cm³       10KHZ@500G         32mv/cm³      50KHZ@225G         28mv/cm³    100KHZ@140G        19mv/cm³       500KHZ@50G         12mv/cm³

DC Bias     magnetic force( 50oersteds )perm:10 

Uses.light dimmer chokes.60HZ differential-mode Emi line chokes.DC chokes less than 50KHZ or low Et/N.DC chokes more than(equal to)50KHZ or higher Et/N.Power factor correction chokes less than 50KHZ

-2Material with lower permeability,It can lower AC magnetic flux density when it works compare with other material that have not appendGap loss.

Tempreature EffectThe cores will be suited for operation from -55°C-125°C,It has a high curie temperatur and will be function to several hundred degree celsius,However,long time continued high tempreature operate may result in a permanent decrease in inductance and increase in core loss.

Finisih coatingThe core coated with epoxy and have a minimum dielectric strength of 1000 Volt Dc min.

part NO illustrate

Materials Materials and their characters ,  

Different material’s core loss comparation

Different material and their used

Core loss curves

Percent initial Perm value change curves

Fenquency VS perm curves

inductor coil T68-2

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.