Application:
TTR773 is one very typical transformer turns ratio test set, widely used for Grid, substation and power plant.
Product Features:
-Test range wide,the highest can reach up to 5000.
-Suitable for single phase, three phase and Z-shaped connection transformer.
-Fast test speed, completion TTR test of three-phase transformer within 11 seconds.-Blind test for turns ratio and groups.
-Data display,storage and output
LED display test procedure and data.
Data printing
50 groups data storage
-Protection
Wrong connecting protection for High-voltage terminals and low-voltage terminals.
Wrong connecting protection for 380V input power supply
Short Circuit protection for both transformer and its turn-to-turn. Small size, light weight.
Technical Specifications:
-range: 0.9 ~5000
-Accuracy: 0.1% ± 2 characters (below 500) 0.2% ± 2 characters (500 ~ 2000) 0.3% ± 2 characters (more than 2000)
-Resolution:minimum 0.0001
-Output voltage:160 V, 10V
-Power supply:AC220V ± 10% ,50 Hz±1Hz
-Working temperature: -20 ° C to 40 ° C
-Relative humidity: ≤ 80%, no dew
-Exterior size:395mm×240mm×250mm (instrument),
395mm×240mm×250mm(test wires)
-Net Weight: 6 Kg( instrument), 6 Kg(Test leads)
Compare with TTR771
TTR771 | TTR773 | |
Range | 0.9-10000 | 0.9-5000 |
Interface | RS485,USB | N/A |
Date storage | 480 Group | 50 Group |
Input Power | 220Vac,50Hz | 220Vac,50Hz |
Output Terminals | 8pcs,including neutral point | 6pcs,excluding neutral point |
Size & Weight | 320mm×275mm×140mm,4.6Kg | 395mm×240mm×250mm,6 Kg |
Order Information
-Instrument 1 piece
-Test Wires 1 set
If your local power supply is different from ours, i.e, AC220V ± 10% ,50 Hz±1Hz, we can change subject to your requirement.
Model TTR773 Transformer Turns Ratio Test Set/Tester