What is Oxyhydrogen Flame Generator :
Oxyhydrogen Flame Generator consumes water and electricity, electrolyze water into hydrogen gas and oxygen gas, we can use H2 and O2 as source of flame replacing LPG, Propane, Acetylene fuel or natural gas or other fuel. Oxyhydrogen Flame Generator can be used for welding, cutting, polishing,brazing, glass processing and jewelry processing etc. Also can combust with other fuel together for heating.
Application of Oxyhydrogen Flame Generator chine :
(1) Jewelry Industry:
For welding kinds of chain and string which are made of platinum, gold, silver, copper, stainless steel, etc.
For mending tiny sand holes on jewelry casting.
For jewelry repairing (reforming, casting, welding).
(2) Electronic Industry:
For welding enameled wire, computer wire peeling, LED wafer, flame-treating circuit board,thermocouple andplatinum resistor leading wires.
(3) Medical Industry:
For denture welding.
For welding metal fittings and mending sand holes in dentistry.
No-carbon flame disinfection and glass seal.
For Welding of laboratory teaching, providing convenient, safe and clean oxy-hydrogen flame.
Instrument welding, Air-condition copper pipe welding, Automobile exhaust pipe welding,Fishhook welding,Storage battery tinplate welding,lighting hardware weldingand etc.
2. Heating and sealing
(1) metal and nonmetal heating
(2) glass tube sealing,quartz glass tube sealing
(3) ampoule bottles sealing
(4) water injection drawing sealing
(5) mould repair, quenching, crucible heating melting metal
(6) solar wafer processing, IC packaging.
3.Polishing:Organic glass/Acrylic Polish
For welding work,Okay Oxyhydrogen Flame Generator has below advantages compared with other welding methods:
1. Operation is convenient:
The Oxyhydrogen Flame Generator produce oxy-hydrogen gas by automatic way, gas cylinder is not required any more. Turn on to produce gas and shut down to stop producing. Machine will shut down automatically when the gas pressure is too high (if gas output can not be used up). Machine will turn on auto when the gas pressure is not enough. The gas output is adjustable.
2. Welding is fast:
The oxy-hydrogen flame temperature is high up to 2800 degree, it can heat the welding spot to melting point fast in about 1 second to finish welding.
3. Welding precision is high:
The flame is concentrated, it can achieves welding of precise devices.
4. Welding spot is smooth and beautiful:
Oxy-hydrogen flame combustion doesn't form carbide, so there is no black spot, avoid the second treatment of cleaning and polishing.
5. Environment friendly:
Oxyhydrogen Flame Generator 's fuel comes from water, there is water vapor after combustion, no any harm done to environment.
6. Energy saving:
Oxyhydrogen Flame Generator saves energy cost over 30% compared with other gas welding way.Adding the oxygen cost, it will save cost over 40%.
Unique Technology OKAY Oxyhydrogen Flame Generator compared with others:
1. The power supply:Inverter DC resonance power supply is made of imported IGBT power valve. The electrolysis is 30% higher efficiency and electrolysis current is stable and adjustable. It can long-term work 24-hours continuous.
2. Electrolysis Cell:It adopts large precise mould to integrated formed, prevent from explosion and leakage, work life is long. It is suitable for kinds of complicated working condition.
3. Heat dissipation system:Unique reasonable structured duct design radiation design and larger space of three-dimensional air flue for heat dissipation to ensures the radiation effect,meet the need of the work for 24 hours under high temperature of 40 degrees in summer.No need to cooling by water cycle.
4. Safe system:Safe system adopts multi-level swing type water seal design, detects and controls the safe water level automatically, perfect combination by multilevel wet-type flashback arrestor technology, automatic safety valve technology and dry-type fire resistance technologydry-type flashback arrestor, ensure 100% prevent from backfire.
5. Control system:Control water level and pressure automatically, exception catch setting, stabilize the pressure device.
6. Water and gas separation system:Gravity swing water and gas separation system, water vapor collection and backflow design, ensure that there is no mositure in the gas output pipe.
Standard configuration of Oxyhydrogen Flame Generator :torch and nozzle: 1 setsoft pipe : 2mFlame arrester:1 unit
Technical Parameters of Oxyhydrogen Flame Generator :
|AC Voltage Requirement (V)||220/110||220/110||220/110||220/110||220/110|
|Max. Gas Output(L/h)||100||200||300||400||650|
|Max. Working Pressure (kg/cm2)||1.3||1.3||1.3||1.3||1.9|
|Max. Water Consumption (L/h)||0.06||0.11||0.17||0.23||0.35|
|Flame Modifier Feed||manual||manual||manual||manual||manual|
|Dimensions - L*W*H (mm)||480*280*360||620*280*360||780*280*520||950*380*520||510*450*600mm|
|Gross Weight (kg)||12||33||38||45||60|
|Ventilation Space Requirement (mm)||200 in each direction||200 in each direction||200 in each direction||200 in each direction||200mm in each direction|
|Suitable Enameled Wires||<0.35mm 2 pcs||0.35mm-0.5mm 2 pcs||1mm several pcs||2.00mm several pcs||Several pcs thicker than 2.00mm|
|Suitable Ampoule Bottles||1~10ml,1~5ml is the best||1~20ml|
Portable high efficiency Oxyhydrogen Flame Generator/Oxyhydrogen Generator OH100-OH600