Hot dip galvanized U type shackle for guy wire
The guy wire fittings are mainly used to fix guy wire pole towers,including all parts from the top of pole tower to the guy wire on the ground.The safe running of guy wire pole tower mainly depends on guy wire and its fittings.
According to service conditions,the guy wire fttings may be classified into wire tension type,adjustment type and connection type,totally including 12 series.
The technique criterion of guy wire fittings conforms to the relevant state and industrial standards.
Specification Table
Model | Dimensions(mm) | Rated failure load(kN) | Weight(kg) | ||||
C | R | M | h | d | |||
UL-7 | 20 | 15 | 16 | 120 | 16 | 70 | 0.65 |
UL-10 | 22 | 17 | 18 | 140 | 18 | 100 | 0.92 |
UL-12 | 24 | 18 | 22 | 140 | 20 | 120 | 1.2 |
UL-16 | 26 | 19 | 24 | 140 | 22 | 160 | 1.64 |
UL-20 | 30 | 22 | 27 | 160 | 24 | 200 | 2.9 |
Note: The body and wedge are made of mallable iron,the cotter-pin is made of stainless steel and the other parts are made of steel. All ferrous parts are hot-dip galvanized. |
Note:Our company mainly researches and sells: optical fiber communication equipment, high and low voltage electrical equipment ,safty protection product--------insulators,suspension clamp,strain clamp,link fittings,fixing fittings,ground clamp ,transformers,safety helmet and so on.
Hot dip galvanized U type shackle for guy wire