design kitchen faucets mixers taps 1.OEM factory 2.MOQ:200pcs 3.Ni 3-5um,Cr 0.2-0.3um 4.Cer:ISO9002:2008/CE/EN331/SGS

design kitchen faucets mixers taps

1)Die casting technology,Weight 1537g.

2)Composition(Cu>59%,Pb<1.8%,Fe<0.3%)high Cu,low Pb .

3)KCG ceramic cartridge,500,000 timesfor both open and close.

4)Brass/Plastic aerator.

5)G1/2 or G3/8 FANSKI SS knitted hoses.

6)Warranty:5 years.

We have most faucet in kitchen and bath room in brass material which our faucet in body adopting forging technology and casting technology with chrome, satin, brushed  nickel red oil and SS surface and the chrome surface usually achieved 3UM nickel and the chrome achieveed 0.1UM and for high quality for Europen nickle in 8UM-9UM, chrome in 0.15UM-0.5UM. For China 13UM in nickel and 0.2 more chrome.The cartridge should be use 5000000 times that mean is should be use 5 more years and achieved 25kg water pressure and 8kg gas pressure, and the cartridge we use Spanish Seal.The materials of accessories which use brass contained cover, cap, spout and aerator with green markes.The flexibel hose use 304 stainless steel wire with 8 nickel if the stainless steel not have nickel that will rusting. The tubes inside of hose use EPDM and the nut of hose use forging brass material which the hose achieved neutral salt in 200h and tye acid salt achieved 24h.I hope you would be understand me, I know every details about faucet, because of I work this area for 5 more years.

PLS-01014 design kitchen faucets mixers taps