Welcome to ECVERY
automatic sensitive hot and cold faucet
automatic sensitive hot and cold faucet
Supplier Info
[China Supplier]
Contact Person : Mr. WANG BIN
Tel : 86-21-33199668
Fax : 86-21-39527055
Product Detail
automatice sensitive hot and cold faucet

Specifications

1.power:DC 4x1.5V , AC220V 2.power consumption :less than 5uA(DC);2W(AC) 3.Sensor distance:5- 25cm 4.protection degree:lp56

1 . Water saving: water only flows out when your hands approach it ,and stops immediately once your hands draw  back from sensing zone. besides, water will stop automatically after 30 seconds,too.

2. Hygienic: automatically operate and stop operating  without touching the faucet handle,which can prevrnt you from bacteria infection,especially in public places.                     

3. Low power consumption: For DC flushers,4AA alkakine batteries can be used for 2 years based on 300 times  per  day.

4. Comfortable: water flows out at an angle of  45 degree,making washing space larger.

5. Easy to maintain: There is a strainer inside to prevent sundries from entering the solenoid wire and the strainer is easy to clean.

6.High-technology:  integrated sensor and circuit board lnto faucet body.

7. Battery tape:4 pieces AA type alkaline battery

8 Plating: Plating layer: Copper: 7-8um, Ni: Above 10um, Cr: 0.25um.

9.Inlet diameter and outlet diameter are  G(1/2'')

10.Long life span : within 5 years  warranty

automatic sensitive hot and cold faucet

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.