2-wire conventional photoelectronic smoke detector that use a state-of-the-art optical sensing chamber

General Desciption

The 332 series is 2-wire conventional low profile plug-in detectors designed to meet the performance criteria designated by UL. It is a low cost and high reliability series. A LED will be latched on to locally indicate alarm. The in (-) and out (-) terminals are short-circuited inside the detectors. When the detector is mounted, it will continue the wire to the next device or EOL resistor. When it is removed, the wire will be open for wiring supervision.

Specifications

-Size: Height (With Base): 5.0 cm

          Diameter: 10.2 cm

-Operating Temperature Range: 0oC to 49oC

-Operating Humidity Range: 5% - 95% RH

-Latching Alarm: Reset by momentary power interruption

-Max Air Velocity: 4000ft/min

-Operating Voltage: 8.5 - 35 VDC

-Standby Current: ≤ 90 μA

-Alarm Current: min 2mA at 3.1 VDC

                       max 80mA at 6.5 VDC

-Maximum Ripple Voltage: 4 Volts peak to peak

Photoelectronic Detector